DI Products for All Needs

CZ455 Magazine Well Block 22LR

delta-admin — Mon, 29 Apr 2019 14:13:26 +0000

Designed for the 455 for those that want to replace their worn or deformed 22LR plastic spacer with one made of aircraft aluminum. Works with factory and aftermarket magazine wells.

The spacer is slightly shorter to work with our 455 22LR only trigger guard (CZ-19036-22), but will work with the factory trigger guard also, however it will not stick out far enough to be flush with the factory trigger guard.

The post CZ455 Magazine Well Block 22LR appeared first on Delta Tactical.

Tikka T1X Scope Mount 25MOA

delta-admin — Mon, 21 Jan 2019 08:53:42 +0000

Convert your stock Tikka T1X dovetail to a 25MOA Picatinny scope rail. Great for quick release rings so you can easily swap optics between the Tikka and other rifles. The supplied TORX drive screws hold the mount firmly to the factory drilled & Tapped receiver. Works great for those shooters who want to “zero” their 22LR out to 300yrds for long range practice.

No gunsmith, drilling or tapping required for installation.

Recommended tools:

#15 TORX(Star)
Purple LocTite
Inch pound torque wrench

Image shown unfinished. Rail will be black coated when shipped

6061 Aircraft Aluminum
Mounting Screw Torque – 7-8 inch pounds
Mil Spec Hard Coat Anodized
Adds approximately .360″(9mm) height to the receiver

The post Tikka T1X Scope Mount 25MOA appeared first on Delta Tactical.

Tikka T1X Scope Mount

delta-admin — Mon, 21 Jan 2019 08:48:29 +0000

Convert your stock Tikka T1X dovetail to a standard Picatinny scope rail. Great for quick release rings so you can easily swap optics between the Tikka and other rifles. The supplied TORX drive screws hold the mount firmly to the factory drilled & Tapped receiver.

No gunsmith, drilling or tapping required for installation.

Fits ALL rimfire calibers

Recommended tools:
#15 TORX(Star)
Purple LocTite
Inch pound torque wrench

Made in the USA

The post Tikka T1X Scope Mount appeared first on Delta Tactical.

CZ 452 Adjustable Sear – 22WMR/17HMR (19004)

delta-admin — Sun, 28 Oct 2018 14:33:41 +0000

DIP Inc. CZ 452 Adjustable Sear – 22WMR/17HMR

NEW design! Almost 40% lighter than the factory sear for a much better feel and easer to adjust at lower trigger pull weights when used with our spring kit(item 19040).

Detent ball retention pin hole to help hold the ball and spring in place for a much easier installation.

An affordable way to get rid of the factory trigger creep in your CZ 452.

The CZ 452 adjustable sear allows you to remove almost 100% of the “take-up” in the trigger and reduce that long, gritty, heavy, factory trigger pull for a crisp, clean break.

Adjustable engagement to improve feel and to help you achieve accurate shot placement. Blued steel finish.

Fits 22lWMR and 17HMR

Adjustable engagement
Detent ball/spring retention pin hole
Almost 40% ligher than stock
Drop-in installation

The post CZ 452 Adjustable Sear – 22WMR/17HMR (19004) appeared first on Delta Tactical.

Howa Mini Action Trigger Guard DBM – HOW-00010

delta-admin — Sun, 28 Oct 2018 14:13:20 +0000

NEW!
Aluminum Replacement *Trigger Guard for the HOWA MiniAction rifles! Gone are the broken action screw tabs. Direct replacement for the plastic factory trigger guard/mag well.
We redesigned the magazine catch spring perch location to add a noticeable amount of tension to help prevent accidental magazine drops.

The post Howa Mini Action Trigger Guard DBM – HOW-00010 appeared first on Delta Tactical.

16001 Extended Anschutz 64 Picatinny Rail (16001-M)

delta-admin — Sun, 28 Oct 2018 13:55:58 +0000

Finally! A dovetail to Picatinny scope mount for the Anschutz 64″ 17HMR/22WMR action built with the shooter in mind! We asked, and then listened to your suggestions and came up with what we think most shooters can use on the Anschutz rifle. Made from 6061 billet on CNC mills. Extended past the Anschutz **receiver to make scope position easy for what ever shooting position you shoot from the most, be it prone, bench or standing. Fits ALL current and older magnum models with the full dovetail cut receivers.

Approximately 9.15mm tall
*Fits the Weatherby MKII XXII with the Anschutz 64 action also
Made in the USA

The post 16001 Extended Anschutz 64 Picatinny Rail (16001-M) appeared first on Delta Tactical.

452 – 17HMR/22WMR Trigger Guard (19032)

delta-admin — Tue, 01 Dec 2015 04:07:03 +0000

NEW 100% CNC machined one piece steel trigger guard for the 17HMR/22WMR.

Great for those of us that like the CZ but have a hard time trying to understand why CZ was so cheap on the trigger guard?

All HAND FINISHED(very time consuming) and hot-blued for a fantastic finish to match your CZ 452 American.

*Fits the metal magazine well models only.

Please check your magazine well. Some CZ 17HMR and 22WMRs came with a plastic magazine well and thus moved the front action screw forward, this will NOT fit the plastic magazine well models.

The post 452 – 17HMR/22WMR Trigger Guard (19032) appeared first on Delta Tactical.

CZ 452 – Steel Tear Drop Trigger Guard 22LR (19030TD)

delta-admin — Tue, 01 Dec 2015 04:00:12 +0000

100% CNC machined one piece steel trigger guard for the 452 – 22 long rifle or 17 Mach 2 chambered rifles only.

Elegant “Tear Drop” shaped design to complement any CZ rifle.

Great for those of us that like the CZ but have a hard time trying to understand why CZ went so cheap on the trigger guard?

All HAND FINISHED(very time consuming) and hot-blued to match the CZ American receiver.

The post CZ 452 – Steel Tear Drop Trigger Guard 22LR (19030TD) appeared first on Delta Tactical.

CZ Magazine Floor Plate – 22LR (19055-BLK)

delta-admin — Sat, 04 Apr 2015 09:52:51 +0000

NEW! – Black 22LR Aluminum Magazine Floor Plate.

Replaces the broken or deformed plastic floor plate on the 22 Long Rifle metal magazine.

Simple installation, NO special tools required!

1 floor plate per package

The post CZ Magazine Floor Plate – 22LR (19055-BLK) appeared first on Delta Tactical.

CZ Extended Magazine Catch – 452, 453, 455 (19054)

delta-admin — Sat, 04 Apr 2015 09:47:48 +0000

NEW! Extended magazine catch for any 452, 453 and 455 CZ rimfire rifles makes it easer to release the magazine for faster magazine changes.

The post CZ Extended Magazine Catch – 452, 453, 455 (19054) appeared first on Delta Tactical.