Dial In, Maintain, and Clean Your Model 700®

Built specifically for owners of Remington Model 700® and similar bolt-action rifles, the Model 700® Toolkit includes everything you need to install, maintain, clean, and tune your rifle for peak performance. Whether you’re mounting optics, adjusting hardware, breaking down actions, or field cleaning between shots, this kit keeps your rifle running smoothly when it matters most.

🔧 Precision Torque Control

The kit includes the All-In-One Torque Driver (15-65 in-lbs), allowing you to confidently tighten scope rings, base mounts, action screws, and accessories with perfect torque every time. Eliminate stripped screws, over-tightening, and repeatable point-of-impact shifts.

🧹 Complete Cleaning & Maintenance

The custom Model 700® Quick Action Brush simplifies raceway and lug recess cleaning between shots, while the Model 700® Bolt Opener allows quick, controlled bolt disassembly for advanced maintenance.

🎯 Key Features & Included Tools:

• Ratchet T-Handle w/ Locking Hex Drive

• All-In-One Torque Driver (15-65 in-lbs)

• Model 700® Quick Action Brush with Large Parts Holder + 5 Replacement Swabs

• Model 700® Bolt Opener

• Extension / Punch Holder

• 8-32 Adapter

• 1/2” Socket & 1/4” Bit Adapter Set

• Two Brass Cleaning Rods (8-32 threaded)

• Cleaning Brush

• Steel Pick

• Brass Hammer Head

• Pin Punches: 1/16”, 3/32”, 1/8”

• Extended Action Bits (4” Length): 5/32”, 3/16”

• Magnetic Patch (Small Parts Holder)

• Soft Carrying Case w/ Molded Bit Holder

🔩 Electroless Nickel Plated Bit Set (24 Pieces):

• Hex: 2.5mm, 3mm, 4mm, 5mm, .050”, 5/64”, 3/32”, 1/8”, 7/64”, 9/64”, 5/32”, 3/16”, 1/4”

• Screwdriver: PH1, PH2, 3/16”, 3/32”

• Torx: T8, T10, T15, T20, T25, T27, T30

💼 Compact & Organized

Everything is organized into a custom soft-sided case with molded holders, keeping your bits, drivers, and specialty tools protected and ready for the field, bench, or range.

🛠 Ideal For:

• Model 700® owners & clones

• Bolt-action precision rifle shooters

• Hunters & long-range competitors

• Gunsmiths & armorers

• Law enforcement & tactical marksmen

The post Model 700® Toolkit appeared first on Delta Tactical.

Stay Prepared for Consistent, Clean Performance

Designed for use with the Model 700® Quick Action Brush, these Replacement Swabs ensure your cleaning tool continues to deliver optimal performance after multiple deep cleanings. Over time, heavy carbon, dirt, and debris will saturate your original swabs—this 5-pack gives you replacements ready for continued reliable action cleaning.

🧹 Maintain Peak Cleaning Efficiency

The rotating swab head on the Quick Action Brush effectively removes carbon buildup from your bolt lug recesses. These soft replacement swabs restore full cleaning performance when the originals become too worn or saturated after repeated use.

🎯 Key Features:

• Compatible with the Model 700® Quick Action Brush

• Soft, non-marring swabs for safe, thorough cleaning

• Effectively removes carbon, dirt & debris from lug recesses

• 5-pack ensures you’re always prepared for field or bench cleaning

• Quick and easy replacement process

💼 Ideal For:

• Precision rifle shooters

• Bolt-action hunters

• Long-range competitors

• Firearm maintenance professionals

• Anyone running regular deep-cleaning routines

The post Quick Action Brush Replacement Swabs – 5 Pack appeared first on Delta Tactical.

Fast & Effective Action Cleaning for Model 700® Rifles

Running your bolt in the field exposes your rifle’s action to dirt, debris, and carbon buildup that can cause feeding issues, extraction failures, and premature wear. The Model 700® Quick Action Brush is a dedicated all-in-one cleaning tool designed to quickly clear debris from your bolt raceways and lug recesses—keeping your rifle running smooth, reliable, and accurate.

🧹 Complete Action Cleaning — Right Where It Matters

This innovative tool combines two cleaning actions in one stroke:

• Dual Horizontal Nylon Brushes:
  Clean and sweep the raceways while also stabilizing the tool inside the action during use.

• Rotating Swab Head:
  The rod end actuates a rotating soft swab, clearing carbon and debris from the lug recesses with precision.

🔧 Designed for Field & Bench Use

Whether you’re in the field or on the bench, this tool allows quick action cleaning without full disassembly, helping you stay on target with minimal downtime.

🎯 Key Features:

• Specifically engineered for Model 700® actions

• Dual-action cleaning: raceways & lug recesses

• Durable nylon brushes for non-marring cleaning

• Rotating soft swab for lug recess carbon removal

• Compact, lightweight, and field-ready

• Helps prevent feeding failures and excessive wear

💼 Ideal For:

• Precision rifle shooters

• Long-range hunters

• Field armorers

• Bolt-action competitors

• Tactical rifle operators

The post Model 700® Quick Action Brush appeared first on Delta Tactical.

Fast, Clean Battery Changes — No More Damaged Caps

The Coin Slot Battery Cap Tool is purpose-built to make changing coin slot style battery caps fast, easy, and safe. Specifically designed for Vortex optics and many other popular red dots, scopes, and electronic sights, this tool eliminates the risk of marring or scratching your optic’s delicate cap finish during battery changes.

🔧 Protect Your Optics — Designed for Precision

Unlike using improvised tools (coins, screwdrivers, knives), this soft aluminum tool is engineered to fit perfectly into coin slot battery caps. The non-marring design protects the finish of your scope while giving you enough leverage to loosen or tighten the cap easily.

🛠 Works with Any 1/4″ Driver

The built-in steel insert allows the tool to work seamlessly with any standard 1/4″ driver, including:

• Fix It Sticks Tools

• T-Way Wrench (sold separately)

• Any standard 1/4″ bit driver

🎯 Key Features:

• Compatible with Vortex and most common coin slot battery caps

• Machined from lightweight, soft aluminum

• Steel insert for 1/4″ magnetic drivers

• Prevents scratches, gouges, or marring

• Works with all standard 1/4″ drivers & Fix It Sticks tools

• Compact, portable design

💼 Ideal For:

• Hunters

• Competitive shooters

• Precision rifle users

• Range armorers

• Anyone running coin-slot optics

The post Coin Slot Battery Cap Tool appeared first on Delta Tactical.

The Ultimate Handgunner’s Kit — Professional Tools, Anywhere You Go

The Pistol Armorer’s Toolkit by Fix It Sticks is the most comprehensive and portable pistol-specific tool kit available. Whether you’re maintaining, repairing, or upgrading handguns at home, at the range, or in the field, this all-in-one toolkit gives you professional-grade capability wherever your pistols take you.

🔧 Cut Out the Guesswork with Precision Torque

The kit includes the Mini All-In-One Torque Driver (6-25 in-lbs), giving you precise control over fasteners, optics, mounts, and components. No more stripped screws or loose parts—just turn the drive handle until the hash mark aligns with your required torque value for safe, repeatable, professional results.

🛠 The Complete Portable Gunsmith Bench for Pistols

From full disassembly and deep cleaning to optics installation and component upgrades, this toolkit includes everything the serious handgunner or pistol armorer needs for:

• Red dot optic mounting (RMR, MOS, etc.)

• Sight adjustments

• Disassembly & assembly

• Cleaning & maintenance

• Accessory installs & upgrades

🎯 Key Features & Tools:

• Mini All-In-One Torque Driver (6-25 in-lbs)

• Bit driver handle with T-handle capability

• Selection of firearm-specific bits for pistol platforms

• Glock® armorer tools (Sight tool, Mag plate tool, Channel tools)

• 1911 bushing wrench

• Punch set for pin removal

• Non-marring brass hammer head

• Cleaning brushes and scrapers

• Hex, Torx, Phillips, Slotted bit set

• Compact zippered case with foam organizers

💼 Highly Portable, Fully Equipped

This compact toolkit delivers the experience of a full workbench while remaining fully portable — ideal for:

• Gunsmiths & armorers

• Professional shooters

• Competition & IDPA/USPSA shooters

• Law enforcement / agency armorers

• Firearm instructors & training facilities

🔒 No Pistol Left Behind

Whether you run Glocks®, 1911s, Sig Sauer®, or modern striker-fired pistols, the Pistol Armorer’s Toolkit has the tools you need to maintain, adjust, repair, or upgrade your handguns.

The post Pistol Armorer’s Toolkit appeared first on Delta Tactical.

Every Firearm. Every Tool. Anywhere You Go.

The Pro Armorer’s Toolkit is Fix It Sticks’ most complete, professional-grade, mobile gunsmithing kit ever built — engineered for armorers, gunsmiths, professional shooters, law enforcement, range owners, and serious firearm enthusiasts who demand total capability wherever they work.

This all-in-one system contains nearly every specialty tool Fix It Sticks makes, organized inside a rugged, waterproof Nanuk® 905 hard case with precision-cut foam inserts. Despite its extensive content, it remains highly portable, weighing under 10 lbs and measuring only 13” x 11” x 6.5”.

🔧 Precision Torque Control Included

• Individual Torque Limiters (10, 15, 20, 25, 30, 35, 45, 55, 60, 65, 80 in-lbs)

Confidently tighten scopes, rings, actions, and fasteners with exact torque values — no more guessing or stripped threads.

🛠 Designed for All Firearm Platforms

This kit includes dedicated tools for:

• AR-15 / AR-10 platforms

• Glocks®, Sig Sauer®, 1911 pistols

• Bolt-action rifles (Remington 700, etc.)

• Shotguns

• Optics and mounts

🎯 Complete Tool List:

• General Tools:
  Ratchet T-Handle w/ Locking Hex Drive
  Extension/Punch Holder
  Magnetic Tray & Bench Block
  Mini Pry Bar
  Brass Hammer Head
  Steel Pick
  Bronze Scraper
  Non-marring Plastic Pin Punch
  Small, Medium & Large Parts Holders
  8-32 Adapters (x2)

• Specialty Gunsmith Tools:
  Shotgun Choke Wrench
  1911 Bushing Wrench
  Spring Tool
  E2 Slide Punch
  Grip Screw Bit
  Glock® Sight Tool, Mag Tool, Channel Remover & Installer
  Remington® 700 Bolt Opener
  Bolt Carrier Group Scrapers (.223, .308)
  Extractor Tools (.223, .308)
  Castle Nut Wrench
  A2 Sight Adjuster
  Bolt Catch Pin Punch with Nylon Surface Protector
  Pivot Pin Tools (AR10, AR15)
  Aimpoint® Bit
  Battery Cap Tool
  3/8” Adjustment Wrench
  Scope Jack

• Cleaning System:
  Cleaning Rod & Bore Obstruction Kit (Stainless Rods & Bore Adapters for .22, .30, & 6.5 Creedmoor)
  Obstruction Tips
  Double Ball Bearing Drive Adapter
  3 Cleaning Brushes (Nylon & Bronze)

• Bubble Leveling System:
  Machined Aluminum Bubble Level Set with Magnetic Level & Rail Clamp Level

• Comprehensive Bit Selection:

  • 40 Electroless Nickel Plated 1” Bits:
    Hex, SAE, Metric, Phillips, Slotted, Torx

  • 24 Electroless Nickel Plated 2” Bits:
    Hex, SAE, Metric, Phillips, Slotted, Torx

  • 6 Extended Action 4” Bits

• Full Punch Sets:
  Steel Pin Punch Set
  Brass Pin Punch Set
  Roll Pin Punch Set
  Roll Pin Starter Punch Set

💼 Protected & Organized in Nanuk™ 905 Hard Case

• Waterproof (IPX7)

• Dustproof (IP6X)

• MIL-SPEC Certified

• Custom laser-cut foam inserts

🔒 The Ultimate Gunsmith’s Portable Workbench

Whether mounting scopes, installing parts, maintaining weapons systems, or tuning optics, the Pro Armorer’s Toolkit provides unmatched capability with professional precision — ready for the field, range, or shop.

The post Pro Armorer’s Toolkit appeared first on Delta Tactical.

Your Entire Workbench, Anywhere You Go

The Field Armorer’s Toolkit by Fix It Sticks is the most comprehensive and versatile portable gunsmithing kit available. Designed for serious firearm owners, gunsmiths, law enforcement armorers, and precision shooters, this all-in-one toolkit gives you the freedom to service, maintain, and upgrade your rifles, pistols, and shotguns—on the range, in the field, or in the workshop.

Despite its extensive tool selection, this kit remains highly portable and compact with a soft-sided, organized carry case that makes it easy to take your entire tool bench wherever your firearms go.

🔧 Precision Torque Control

Choose your torque solution:

• Large or Mini All-In-One Torque Driver (adjustable from 15-65 in-lbs)

• Or individual Torque Limiters (6, 15, 25, 45, 65 in-lbs)

Never over-tighten or under-tighten critical components again. Mount optics, fasten critical hardware, and perform gunsmith-level work confidently with precise torque settings.

🛠 Extensive Gunsmith Tools for All Platforms

The Field Armorer’s Toolkit includes everything you need for servicing:

• AR-15 & AR-10 platforms

• 1911 pistols & Glocks

• Bolt action rifles

• Shotguns (Universal Choke Wrench included)

• Scopes, mounts & accessories

🎯 Included Tools & Accessories:

• Ratchet T-Handle w/ Locking Hex Drive

• Punch Extension & Holder

• Universal Shotgun Choke Wrench

• 1911 Bushing Wrench

• Glock Sight Tool, Magazine Base Plate Tool, Channel Remover & Installer

• Mini Pry Bar

• Brass Hammer Head

• .223 & .308 BCG Scrapers

• Pin Punch Sets (Standard, Brass & Roll Pin)

• Castle Nut Wrench

• Remington 700 Bolt Opener

• Bronze Scraper, Steel Pick, Cleaning Brush

• A2 Sight Adjuster, Aimpoint® Bit, 3/8″ Adjustment Wrench

• Magnetic Tray & Bench Block

• Two 8-32 Adapters

• Extensive Bit Set:

  • 36 x 1″ Bits (Torx, Metric Hex, SAE Hex, Phillips, Slotted)

  • 24 x 2″ Bits (Torx, Metric Hex, SAE Hex, Phillips, Slotted)

  • 6 x 4″ Extended Action Bits

• Soft Zippered Carry Case with organized molded tool holders

💼 Built for Professional Armorers & Serious Shooters

Whether you’re mounting optics, replacing parts, installing accessories, or performing full firearm maintenance, the Field Armorer’s Toolkit gives you the exact tools you need — eliminating unnecessary downtime and ensuring every firearm remains fully mission-ready.

The post Field Armorer’s Toolkit – Individual Torque Drivers appeared first on Delta Tactical.

The Complete Field Toolkit for Every Rifle Hunter
Be fully equipped at camp, in the field, or at the bench with the Rifle Hunter’s Toolkit — a purpose-built kit that includes everything you need to confidently install, maintain, adjust, and clean your rifle and optics. Whether you’re mounting scopes, tightening critical fasteners, or performing quick field cleans, this kit eliminates the guesswork and keeps your gear performing flawlessly.

🔧 All-in-One Torque Driver: Precision Simplified

Gone are the days of over-tightening or under-tightening. The All-in-One Torque Driver lets you easily dial in torque values from 15–65 in-lbs — simply twist the drive handle until your desired setting lines up with the clear hash mark. Perfect for optics mounting, scope rings, action screws, and rifle accessories.

🧼 Quick Field Cleaning with BoreSnake® & Pull-Through Cleaner

Perform fast bore cleans without making a mess. The included Hoppe’s® BoreSnake® scrubs, cleans, and swabs your bore in one efficient pass — removing fouling 160x faster than standard patches. Pair it with the Fix It Sticks Pull-Through Bore Cleaner Bit for added control and leverage when you need it most.

🎯 Everything You Need, All in One Kit

• All-in-One Torque Driver (15-65 in-lbs)

• T-Way T-Handle Wrench

• 15 Precision Bits:
  T10, T15, T20, T25, Hex 3/32”, 5/64”, 1/8”, 5/32”, 3/16”, 2.5mm, 3mm, 4mm, 5mm, P1, Slotted 5mm

• 1/2” Socket & 1/4” Bit Adapter

• Pull-Through Bore Cleaner Bit

• Hoppe’s® BoreSnake® (AR-15 .22-.223 or .30-.308 options)

• Zippered Case with molded accessory holder and oil-resistant side cleaning pocket

💪 Built for Hunters Who Demand Reliability

Whether you’re chasing deer, zeroing your optics, or deep in the backcountry, this compact toolkit ensures your rifle stays dialed in, operational, and reliable when it matters most.

The post Rifle Hunter’s Toolkit with All-in-One Torque Driver – 308 appeared first on Delta Tactical.

When 16.5 Inch Lbs is reached:

• Audible “Click” is heard.
• Limiter “spins” preventing further torque from being applied.

Features

• Accepts any standard 1/4″ bit
• Fits into any standard 1/4″ driver
• +/- 6% Accuracy
• Retains accuracy for 20,000 cycles

Integrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.

Integrates perfectly with T-Way Wrench for shop use.

The post 16.5 Inch Lbs Miniature Torque Limiter appeared first on Delta Tactical.

When 18 Inch Lbs is reached:

• Audible “Click” is heard.
• Limiter “spins” preventing further torque from being applied.

Features

• Accepts any standard 1/4″ bit
• Fits into any standard 1/4″ driver
• +/- 6% Accuracy
• Retains accuracy for 20,000 cycles

Integrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.

Integrates perfectly with T-Way Wrench for shop use.

The post 18 Inch Lbs Miniature Torque Limiter appeared first on Delta Tactical.