The Magpul M-LOK Bipod Mount (MAG609) lets you attach much-loved Harris-style stud bipods directly to M-LOK handguards and forends while keeping the bipod close to the rail for strength, stability, and a clean profile.

By harnessing the direct-connect properties of M-LOK, the bipod rides nearer to the mounting surface than it would on a standard picatinny rail adapter. This minimizes torque on your handguard and keeps your setup sleek and functional.

Made from mil-spec anodized aluminum, the mount is robust yet light. Its ends and corners are beveled to avoid edges that catch on gear or obstruct movement.

All necessary hardware for mounting into M-LOK slots is included.

Specifications / Features Table

The post M-LOK Bipod Mount appeared first on Delta Tactical.

All hardware necessary for attachment directly to M-LOK Slots is included and and no modifications to the M-LOK hand guard or forend is required.

Made in U.S.A.

FEATURES

• Mounts to all M-LOK compatible hand guards and forends
• Accepts any push-button QD swivel as well as the Magpul QDM
• Machined from Mil-Spec anodized aluminum for durability and light weight
• Beveled edges reduce snagging
• Anti-rotation design prevents swivels from spinning

The post M-LOK QD SLING MOUNT appeared first on Delta Tactical.

• SLEEK, RUGGED, INNOVATIVE – Designed for streamlined storage until deployment. Folded, the sleek housing and legs fit neatly under the barrel and are just under 2.3in deep and 3.3in wide
• SERIOUSLY ADJUSTABLE – Leg extensions slide and lock securely with the push of a button and a tool-less knurled bipod locking knob allows easy adjustment between shots. Legs extend from 7.3in to 10.3in with seven locking detents
• VERSATILE LEGS AND FEET – Spring-tensioned legs stow forward when not in use, and then quickly snap down and lock into place with one hand. Legs accept most Atlas pattern bipod replaceable feet to best match the needs of your environment

The post MAGPUL Bipod For A.R.M.S. 17S Stile Clamp appeared first on Delta Tactical.

Features/Specifications:

• Attachment: QD Sling Swivel
• Feet Material: Rubber
• Folding: Yes
• Height: 6.7″ to 10″
• Style: Swivel
• Weight: 13 oz

The Magpul Bipod is available in BLK or FDE colors.

Made in U.S.A.

The post MAMAGPUL BIPOD QD STUD FDE SWIVEL STUD ATTACHMENT appeared first on Delta Tactical.

Features/Specifications:

• Attachment: QD Sling Swivel
• Feet Material: Rubber
• Folding: Yes
• Height: 6.7″ to 10″
• Style: Swivel
• Weight: 13 oz

The Magpul Bipod is available in BLK or FDE colors.

Made in U.S.A.

The post MAGPUL BIPOD QD STUD BLACK SWIVEL STUD ATTACHMENT appeared first on Delta Tactical.

The post PMAG 10RD 223 AICS BOLT ACTION appeared first on Delta Tactical.

Magpul® Bipod – Picatinny Rail

The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost.

Durable & Lightweight

The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.  Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market.

Innovative, Adjustable, & Easy to Use

Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality.

Smooth & Unobtrusive

From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles.

Functional Feet

The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style.

The Magpul Bipod is available in BLK or FDE colors.

Made in U.S.A.

The post Bipod – For Picatinny appeared first on Delta Tactical.

The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost.

Durable & Lightweight

The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.  Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market.

Innovative, Adjustable, & Easy to Use

Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality.

Smooth & Unobtrusive

From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles.

Functional Feet

The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style.

The Magpul Bipod is available in BLK or FDE colors.

Made in U.S.A.

The post Bipod – For Picatinny appeared first on Delta Tactical.

The 7.62×51 NATO (.308 Winchester) PMAG 10 LR/SR GEN M3 is a lightweight, cost effective, high reliability magazine for SR25/M110 pattern rifles in the smallest possible magazine size.

Ideal for hunting applications with the addition of our Minus Five Round Limiter, for use in states where overall capacity is limited, or with precision platforms using longer than SAAMI-spec match ammunition up to 2.830″ OAL. Perfect for use with a bipod or when shooting off of a pack.

Made in U.S.A.

FEATURES

• Optimized for use with 7.62×51 M118LR or other .308 Winchester ammunition with a max OAL of 2.830″
• Commercial rifle compatibility includes the Armalite AR-10A, Colt LE901-16S, CORE Rifle Systems CORE30, JP Enterprises LRP-07, KAC SR25, LaRue OBR, Les Baer .308, LMT .308 MWS, LWRCI REPR, Mega Arms MATEN, Noveske Gen III N6, POF P-308, Ruger SR-762, Ruger Precision Rifle, S&W M&P10, SIG716, and others*
• True 10-round capacity that does not require limiters, pins, rivets, etc.
• Next-generation impact and crush resistant polymer construction
• Constant-curve internal geometry for smooth feeding
• Anti-tilt, self-lubricating follower for increased reliability
• High-quality stainless steel spring for corrosion resistance
• Flared floorplate aids magazine handling and disassembly yet is slim enough for use with many pouches
• Multi-use Impact/Dust Cover minimizes debris intrusion and protects cartridges from potential damage during storage and transit

*NOTE: Compatible with older model Bushmaster .308 ORC, Remington R-25, and DPMS LR308 rifles, but not optimized for bolt lock functionality with newer models based on the DPMS GII design. NOT compatible with Armalite AR-10B, Springfield Armory M1A, Rock River Arms LAR8, FN SCAR 17S, PTR-91, HK417 or any other rifles that utilize M14, FN FAL, or HK 91/G3 patterned magazines.

To accommodate longer than SAAMI-spec match ammunition, this magazine may not drop free from all makes of lower receivers.

The post PMAG – 10 308WIN appeared first on Delta Tactical.

The PMAG 5 AC L, Magnum is a reliable and durable polymer magazine for .300 Winchester Magnum based family of cartridges and is compatible with long action AICS-spec bottom metal, to include the Bolt Action Magazine Well 700L for the Hunter 700L Stock.

Built using M3 technology, this magazine is advanced in both material and manufacturing processes providing an economical, lightweight, durable and reliable single-stack bolt action magazine.

Made in the USA.

FEATURES

• Compatible with long action AICS (Accuracy International Chassis Systems) pattern bottom metal and Magnum cartridges built on a 0.530″ belted case head such as .300 Winchester, .257 Weatherby, .264 Winchester, .270 Weatherby, 7mm Remington, .300 H&H, and others*
• Accepts a cartridge overall length of up to 3.50″
• True 5-round capacity
• Next-generation impact and crush resistant polymer construction
• Self-lubricating follower for increased reliability
• Long life stainless steel spring
• Paint pen dot matrix panels on the bottom of the body to allow for identification marking
• Flared floorplate aids magazine handling and is easy to disassemble for maintenance

*NOTE: NOT compatible with .404 Jeffery based cartridges and its derivatives such as the Remington Ultra Magnums (RUM/RSAUM) and Winchester Short Magnums (WSM/WSSM)

The post PMAG 5RND AICS LA Magnum 300WM appeared first on Delta Tactical.