The classic TAB Rear Bags have been redesigned to pioritize adaptability and ease of carry. The new V2 rear bags excel not only as rear bags, but also as a front support.

With the addition of double sided Velcro® One Wrap you can secure the V2 Bag to your bipod, fore end, support hand or any object where you require a soft surface for support.

Adjustable height in all three orientations is afforded by both it’s rectangular shape and by simply squeezing or relaxing your hold on the bag.

Choose our light fill for weight savings. Fill weights are filled with enough beads to allow easy adjustment with hand pressure.

Attach the extremely wear and weather resistant Biothane™ corner loop to a carabiner, dummy cord, or wherever you need it most.

FEATURES :

• Made from 1000 Denier Cordura Nylon
• Webbing is all 1″ Velcro® OneWrap
• Entire bag is triple stitched for added strength.
• Closed cell fill on the inside, nothing to hold water
• Made in the USA
• Lifetime Warranty
• SPECS :
• Small: 5.5″x7.0″x2.0″ Light: 2.6oz
• Large: 5.5″x9.0″x2.0″ Light: 3oz

The post Rear Bag V2 Large appeared first on Delta Tactical.

The classic TAB Rear Bags have been redesigned to pioritize adaptability and ease of carry. The new V2 rear bags excel not only as rear bags, but also as a front support.

With the addition of double sided Velcro® One Wrap you can secure the V2 Bag to your bipod, fore end, support hand or any object where you require a soft surface for support.

Adjustable height in all three orientations is afforded by both it’s rectangular shape and by simply squeezing or relaxing your hold on the bag.

Choose our light fill for weight savings. Fill weights are filled with enough beads to allow easy adjustment with hand pressure.

Attach the extremely wear and weather resistant Biothane™ corner loop to a carabiner, dummy cord, or wherever you need it most.

FEATURES :

• Made from 1000 Denier Cordura Nylon
• Webbing is all 1″ Velcro® OneWrap
• Entire bag is triple stitched for added strength.
• Closed cell fill on the inside, nothing to hold water
• Made in the USA
• Lifetime Warranty
• SPECS :
• Small: 5.5″x7.0″x2.0″ Light: 2.6oz
• Large: 5.5″x9.0″x2.0″ Light: 3oz

The post Rear Bag – V2 Small appeared first on Delta Tactical.

TAB GEAR noticed the trend toward multi-caliber rifles and came up with a solution that makes sense. It’s hard to travel with a multi-caliber rifle because there are a ton of expensive metal parts floating around in the case or gun box. Extra barrels have precision-cut threads (often at both ends) that don’t do well when they rattle around like maracas in a Pelican case with other equally expensive metal parts.

TAB GEAR now offers a padded nylon barrel sleeve. There is just enough padding in the sleeve to protect what’s inside without making the sleeve bulky. The sleeve closes with a flap over the opening to keep dirt and debris from getting into the barrel. We put an Accuracy International (AI) .338LM barrel with AI brake in the sleeve and had no problem with fit. The AI muzzlebrake is the size of a small pinecone, so most brakes will certainly fit.

Available in following colours:

• Black
• OD Green
• Coyote Tan

The post Barrel Sleeve appeared first on Delta Tactical.

Our first entry into the ultra light rear bag market. We’ve teamed up with Str8Laced Gun Gear to produce their well known and widely accepted lightweight bag under the TAB GEAR line of products.

The Str8Laced bag weighs around 7 ounces and measures roughly 8”x6”x3”. There are many different deployment options due to the 550 cord on each side that is adjusted with cord locks, and the webbing straps that are on each side of the bag.

 Features:

• Ultra light fill, you hardly know the bag is there.
• 1000 Denier Cordura covering
• Milspec 1” webbing straps on each large side
• Black Oxide grommets on each corner
• 550 cord runs through each grommet and secured with cord locks
• Two loops to allow a carabiner or dummy cord to be attached to.

The post Str8Laced Ultra Light Rear Bag appeared first on Delta Tactical.

Have you been looking for a way to carry your rounds so the bullets do not touch each other? If you go to the trouble of using a bullet pointing die to uniform each bullet tip you don’t want them banging against each other after going to that much trouble.

The TAB GEAR Bullet Binder has 20 separate elastic shell loops to keep the rounds from touching each other. The outside of the Bullet Binder is made of two layers of Cordura with a thick piece of plastic vinyl sandwiched between them to provide protection to the contents.

A separate Velcro label is available as well in colors black, OD, and coyote tan.    

Features:

• 1/8” bungee closure system that is user replaceable and silent opening and closing.
•  1” Loop Velcro strip on the spine to attach caliber identification labels.
•  Thick vinyl sheeting to provide rigidity and strength.
•  1000 D Cordura
• Shell loops are staggered to prevent rounds from touching and for as compact a package as possible.
• Clear window to allow instant viewing of dope cards and other information when opened.
• Twenty round capacity.

Available in OD Green, Coyote Tan, Black, Multicam and Kryptek Highlander.

The post Bullet Binder Long Action appeared first on Delta Tactical.

The TAB GEAR Rear Bags have been a favorite for many years. They are a simple rectangle with straps running both ways, across and length wise, as well as a heavy loop at one corner to allow quick attachment/release from gear. The simple look is a very versatile construction in that with being a rectangular construction there are three different height adjustments. Use the flat, short side, or long side to achieve the desired height.

Recently we have begun fielding requests for a larger bag. We made several prototypes and sent them out to users around the country for evaluation on which size they felt we should go with. The overwhelming choice was what we are now calling our TAB GEAR Large Bag. The thickness and short side are the same dimensions as our Small Bag. The length has been extended by two inches. These TAB GEAR Large Bags have been extremely popular and we are thrilled to be offering them to our customers going forward.

Each is filled with just enough plastic beads to make it easy to adjust the height needed by simply squeezing or relaxing your hold on the bag. The corner loop is easily attached to a carabineer for easy carry.

The webbing that runs long ways on one side and across the bag on the other side provides a simple way to attach the bag to your rifle by running the bipod legs through them. You can also carry it easily by running your hand through the straps.

As with all of our products made from Cordura we offer the Large Bags in all five colors we carry, MultiCam, Kryptek Highlander, Coyote Brown, OD Green, and Black.

Features

• Made from 1000 Denier Cordura Nylon
• Webbing is all 1″ Mil-spec
• Dimensions 5.5×9.0x2.0 (14cm x 23cm x 5cm)
• Entire bag is triple stitched for added strength.
• All corners and webbing are triple stitched for added strength
• Plastic beads on the inside, nothing to hold water
• Light weight
• Like all TAB GEAR, it has a lifetime warranty

The post Rear Bag Large appeared first on Delta Tactical.

TAB GEAR Pinnacle Rifle Sling (PRS)

The Pinnacle Rifle Sling, PRS for short, is our latest product in our line of precision rifle slings. The PRS sling is a drastic departure from the precision rifle slings that we have all used for many years. The PRS sling has no arm loop to allow a traditional “slung up” position by putting your arm through a loop. We have talked to military snipers, law enforcement snipers and match shooters all over the world during the last couple of years while we have been developing this sling. We have not found anyone who has actually put their arm in a shooting loop on an actual deployment or law enforcement call out. The only time you’ll see someone sling up in a match is when there is a dedicated positional stage where you have time to sling up.

That got me to thinking, “why not remove the arm loop altogether and see what happens.” This allows a lot more adjustment range at the front of the sling. This made it possible to do away with all of the excess webbing that was in between the two buckles on our previous models that was there for length of carry adjustment.

The goal has been to remove as much material as possible from the sling yet maintain the ability to be a marksmanship aid in any shooting position.

With the PRS sling carried in a Patrol Carry method, muzzle down in front of the body, you are able to use the sling in every position from standing to unsupported prone and never come out of the sling.

We feel like the PRS sling is the best sling on the market for the military, law enforcement, or match shooter who wants to be able to use a sling as a marksmanship aid in practically every shooting position he may find himself in.

FEATURES:

Like all of our slings the rear swivel can be sewn into the webbing for a very tight connection to the rifle. On all of our slings, the PRS sling included, the webbing at the back that has the swivel sewn in we call the “tail”. There has been a significant improvement over the other tails that we have used on all of our slings before this. We have had a few customers who wanted the tail to be stiffer than in our other slings. On the PRS we have installed some material into the tail that dramatically stiffens the tail, this helps in supporting the rifle when a rear bag is not available or feasible.

Also, like every sling we have ever made there is the option on the PRS to have the rear swivel not be sewn into the tail. This feature allows the shooter to quickly switch out swivels both front and rear should you need to go from one rifle to another rifle that has different sling attachment points.

The PRS also has two buckles like all of our slings. There are some slings on the market that have one buckle and it is usually in the middle of the sling. A very popular method of carrying the precision rifle is in a Patrol Carry position with the rifle carried muzzle down in the front. With a sling with one buckle this positions the buckle in the middle of the back and impossible to reach, so the vast majority of the time the single buckle is a complete waste. This buckle is accessible when the rifle is carried muzzle up on the back. With two buckles when the rifle is carried in the Patrol Carry position the buckle that is at the tail is easy to reach because it is positioned near the shoulder to allow the shooter to quickly unbuckle the rifle from the body should the need arise.

If you purchase the PRS with Fastex Buckles they are not sewn into the webbing. They are attached with metal 1-1/2” metal sliders to allow them to be replaced if need be. If you purchase the PRS with the AutriAlpin Cobra buckles they will be sewn in because we are confident that the Aluminum buckle will not become damaged and need to be replaced.

We can also make the PRS sling with no buckles at all if that is what the shooter desires.

The Marine Corps has practiced shooting from a tripod for many years with the sling attached to a carabiner on the belt and recently more people have begun using and practicing shooting using this method. On the PRS we have constructed a heavy duty loop out of the webbing that is in between the buckles. The loop is sewn in a way that prevents it from collapsing so it will stay open to allow the shooter to quickly unbuckle the sling from the tail at the back of the sling and clip the loop into a carabiner on the belt. There is enough adjustment range when clipped into a carabiner that this allows the shooter to shoot from a tripod or transition to many different shooting positions by loosening or tightening the sling as needed.

The 1-1/2” webbing on the adjustment section of the sling does not have the buckle sewn in in either the Fastex nor the Cobra buckle version. This to allow the user to simply cut off and re-melt the webbing should it be determined that that much adjustment range is not needed.

The release on the quick adjust cam buckle has been changed on the PRS sling by having two layers of 1” webbing sewn together to make the release stiffer. It has also been lengthened and the webbing is folded and bar tacked at the end to create a large “knot” for an easier and more secure grip when releasing tension on the sling.

We have also installed another triple section of webbing with stiffening material added, like at the tail, that is sewn to the front portion of the quick adjust cam buckle. Anyone who has ever had to shoot from a Hawkins position, which is prone with no bipod touching the ground, and the rifle resting on the clenched fist, has found out that the clenched fist is almost high enough to be comfortable but not quite. The hard point that we have installed directly to the front of the quick adjust buckle acts as a mono pod to support the rifle in a Hawkins position, it will support the full weight of a twenty pound rifle.

MATERIALS:

• The same 1-1/2” webbing we have been using in all of our slings since we began making them.
• Mil Spec 17337 1” webbing used on the release tab.
• Choice of ITW Fastex buckles or the amazing AustriAlpin Cobra buckles.
• Metal 1-1/2” quick adjust buckle to allow quick tightening or loosening of the sling.
• Available with made Flush Cup Swivels, Heavy Duty Stud Swivels, HK Hooks, or no swivels at all.

The post PRS Sling FASTEX appeared first on Delta Tactical.

Have you been looking for a way to carry your rounds so the bullets do not touch each other? If you go to the trouble of using a bullet pointing die to uniform each bullet tip you don’t want them banging against each other after going to that much trouble.

The TAB GEAR Bullet Binder has 40 separate elastic shell loops to keep the rounds from touching each other. The outside of the Bullet Binder is made of two layers of Cordura with a thick piece of plastic vinyl sandwiched between them to provide protection to the contents.

A separate Velcro label is available as well in colors black, OD, and coyote tan.

These are sized for typical short action calibers based on the .308 case size. Other caliber sizes will be produced in the future.

Features:

• 1/8” bungee closure system that is user replaceable and silent opening and closing.
• 1” Loop Velcro strip on the spine to attach caliber identification labels.
• Thick vinyl sheeting to provide rigidity and strength.
• 1000 D Cordura
• Shell loops are staggered to prevent rounds from touching and for as compact a package as possible.
• Clear window to allow instant viewing of dope cards and other information when opened.
• Forty round capacity.

Available in OD Green, Coyote Tan, Black, Multicam and Kryptek Highlander.

The post Bullet Binder Short Action appeared first on Delta Tactical.

With the TAB GEAR Short Action Mag Pouch, SAMP, you can go from shooting your 7.62 semi automatic rifle that uses 20 round magazines to your bolt gun that uses 5 round mags and never have to change mag pouches. You would simply activate the built in short shelf which takes less than a minute to set up, and you’re back in the game. No more having to put foam in the bottom of the mag pouch for your short magazines. If you are running 10 round and 5 round AICS magazines leave one shelf in the long configuration and set up the short shelf on the other mag pouch and you can barely tell the difference in how the bottoms of the mags stick up from the pouch top.

The TAB GEAR SAMP can fit all PALS and MOLLE systems, as well a regular pants belt. If you want to train but don’t need a whole vest, battle belt, etc. simply slide a mag pouch or two onto your belt and hit the range.

Features:

The mouth of the mag pouch has been reinforced with a very stiff material inside that helps the pouch maintain it’s shape even when the mag is removed.

It’s very easy for the magazine to be reinserted with one hand.

The pouch can be installed on anything that has PALS, or MOLLE webbing.

Each SAMP comes with two Malice Clips for installation.

The SAMP can also be threaded onto a regular belt too.

The SAMP also has PALS loops on the front so pouches can be stacked.

Secure built in “ Short Shelf” that won’t fail when using shorter magazines.

No more having to insert foam into the bottom of your magazine pouch to keep the magazine from collapsing to the bottom of the pouch.

3mm (1/8”) shock cord secures the magazines and is easily adjusted from long mags to short mags.

The post Long Action Mag Pouch – OD Green appeared first on Delta Tactical.

With the TAB GEAR Short Action Mag Pouch, SAMP, you can go from shooting your 7.62 semi automatic rifle that uses 20 round magazines to your bolt gun that uses 5 round mags and never have to change mag pouches. You would simply activate the built in short shelf which takes less than a minute to set up, and you’re back in the game. No more having to put foam in the bottom of the mag pouch for your short magazines. If you are running 10 round and 5 round AICS magazines leave one shelf in the long configuration and set up the short shelf on the other mag pouch and you can barely tell the difference in how the bottoms of the mags stick up from the pouch top.

The TAB GEAR SAMP can fit all PALS and MOLLE systems, as well a regular pants belt. If you want to train but don’t need a whole vest, battle belt, etc. simply slide a mag pouch or two onto your belt and hit the range.

The TAB GEAR SAMP is extremely versatile, and can be rapidly configured to fit every short action sized magazine on the market that we’ve tested it in:

P-Mag 7.62 20 round mag Larue 7.62 20 round mag M14/M1A 20 round mag Alpha Mag 10 round mag. AI AW 7.62 10 round double stack mag AICS 7.62 10 round mag AICS 7.62 5 round mag Sako 10 round mag

Features:

The mouth of the mag pouch has been reinforced with a very stiff material inside that helps the pouch maintain it’s shape even when the mag is removed.

It’s very easy for the magazine to be reinserted with one hand.

The pouch can be installed on anything that has PALS, or MOLLE webbing.

Each SAMP comes with two Malice Clips for installation.

The SAMP can also be threaded onto a regular belt too.

The SAMP also has PALS loops on the front so pouches can be stacked.

Secure built in “ Short Shelf” that won’t fail when using shorter magazines.

No more having to insert foam into the bottom of your magazine pouch to keep the magazine from collapsing to the bottom of the pouch.

3mm (1/8”) shock cord secures the magazines and is easily adjusted from long mags to short mags.

The post Short Action Mag Pouch – OD Green appeared first on Delta Tactical.