Area 419 Basic Loading block. These loading blocks are the same as our original custom blocks.  The only difference is we minimized the engraving, and also do not offer any customization on them.  This allows us to stock them and sell them cheaper due to shorter cycle times.

Includes standard Area 419 engraving on the nameplate. 50 places of 223, 6.8 SPC, 308, or Magnum, or Lapua bolt faced rounds and 32 places of Cheytac bolt face.  Features rubber pads on the bottom to keep from sliding around.

Block is machined in house from 6061-T6 Aluminum.  Dimensions are 9.5″ x 4″ x 5/8″.  Holes are 0.500″ deep and are a tight fit around the case to prevent tipping over.  Hole bottoms have a small “divot” in the very center to catch powder kernels and prevent any possible accidents with primers.

The post Basic Loading Block – Cheytac appeared first on Delta Tactical.

Area 419 Basic Loading block. These loading blocks are the same as our original custom blocks.  The only difference is we minimized the engraving, and also do not offer any customization on them.  This allows us to stock them and sell them cheaper due to shorter cycle times.

Includes standard Area 419 engraving on the nameplate. 50 places of 223, 6.8 SPC, 308, or Magnum, or Lapua bolt faced rounds and 32 places of Cheytac bolt face.  Features rubber pads on the bottom to keep from sliding around.

Block is machined in house from 6061-T6 Aluminum.  Dimensions are 9.5″ x 4″ x 5/8″.  Holes are 0.500″ deep and are a tight fit around the case to prevent tipping over.  Hole bottoms have a small “divot” in the very center to catch powder kernels and prevent any possible accidents with primers.

The post Basic Loading Block – 284 / 30-06 appeared first on Delta Tactical.

– Machined from 6061 Aluminum

– Standard version holds 200 .473 BF rounds such as 6.5 creed, 6BR, 6.5×47, 308

– 223 version holds 200  .387 BF rounds such as .223, 300Blackout, ect.

– Carry handles machined on both sides for easy moving

– Deep pockets for holding ammo secure

– Size is 6.8″ x 14.5″ x 1″

The post 200 Reloading Block appeared first on Delta Tactical.

Area 419 Basic Loading block. These loading blocks are the same as our original custom blocks.  The only difference is we minimized the engraving, and also do not offer any customization on them.  This allows us to stock them and sell them cheaper due to shorter cycle times.

Includes standard Area 419 engraving on the nameplate. 50 places of 223, 6.8 SPC, 308, or Magnum, or Lapua bolt faced rounds and 32 places of Cheytac bolt face.  Features rubber pads on the bottom to keep from sliding around.

Block is machined in house from 6061-T6 Aluminum.  Dimensions are 9.5″ x 4″ x 5/8″.  Holes are 0.500″ deep and are a tight fit around the case to prevent tipping over.  Hole bottoms have a small “divot” in the very center to catch powder kernels and prevent any possible accidents with primers.

The post Basic Loading Block – 223 appeared first on Delta Tactical.

Includes standard Area 419 engraving on the nameplate. 50 places of 223, 6.8 SPC, 308, or Magnum, or Lapua bolt faced rounds and 32 places of Cheytac bolt face.  Features rubber pads on the bottom to keep from sliding around.

Block is machined in house from 6061-T6 Aluminum.  Dimensions are 9.5″ x 4″ x 5/8″.  Holes are 0.500″ deep and are a tight fit around the case to prevent tipping over.  Hole bottoms have a small “divot” in the very center to catch powder kernels and prevent any possible accidents with primers.

The post Basic Loading Block – Lapua appeared first on Delta Tactical.

Area 419 Basic Loading block. These loading blocks are the same as our original custom blocks.  The only difference is we minimized the engraving, and also do not offer any customization on them.  This allows us to stock them and sell them cheaper due to shorter cycle times.

Includes standard Area 419 engraving on the nameplate. 50 places of 223, 6.8 SPC, 308, or Magnum, or Lapua bolt faced rounds and 32 places of Cheytac bolt face.  Features rubber pads on the bottom to keep from sliding around.

Block is machined in house from 6061-T6 Aluminum.  Dimensions are 9.5″ x 4″ x 5/8″.  Holes are 0.500″ deep and are a tight fit around the case to prevent tipping over.  Hole bottoms have a small “divot” in the very center to catch powder kernels and prevent any possible accidents with primers.

The post Basic Loading Block – Magnum appeared first on Delta Tactical.

Includes standard Area 419 engraving on the nameplate. 50 places of 223, 6.8 SPC, 308, or Magnum, or Lapua bolt faced rounds and 32 places of Cheytac bolt face.  Features rubber pads on the bottom to keep from sliding around.

Block is machined in house from 6061-T6 Aluminum.  Dimensions are 9.5″ x 4″ x 5/8″.  Holes are 0.500″ deep and are a tight fit around the case to prevent tipping over.  Hole bottoms have a small “divot” in the very center to catch powder kernels and prevent any possible accidents with primers.

The post Basic Loading Block – 308 appeared first on Delta Tactical.