Upgrade your ZERO reloading press with a precision tool designed to elevate your bullet seating consistency. The Bullet Seating Plate for The ZERO from Area 419 offers a perfectly flat stainless steel surface to push your cases — eliminating any possible die interference that can induce runout or misalignment.

Why Use This Seating Plate?

• No Die Contact — Unlike traditional shellholders with rims or ledges, this plate has no extraction rim, ensuring the die only interacts with the case shoulder or taper. This minimizes mechanical contact points that can introduce error.

• Maximum Contact Surface — More surface area than typical shellholders means better stability during seating.

• Guaranteed Flatness — Precision-ground stainless steel construction ensures it remains flat and stable under load.

• Only for The ZERO — This plate is purpose-built for the Area 419 ZERO Reloading Press. It will NOT function with other presses — order accordingly.

• Manual Removal May Be Required — Because there’s no extraction rim, cases may need to be removed by hand after seating. Some drop freely by gravity depending on configuration; others must be pulled.

Add this seating plate to your reloading setup and realize improvements in consistency, alignment, and the precision of your handloads when using The ZERO.

The post Bullet Seating Plate for The ZERO appeared first on Delta Tactical.

Really though, that’s not us. We like to use different components, we like to compare, and we want to know that the measurements we are taking are a little more than relative. This is why we are making our ZERO measurement gauges.

GENERAL CONSTRUCTION

To make these measurement gauges, they all needed to be the same. Exactly the same. And they had to stay that way. All of these parts are made on our world-class DMG Mori lathes, from American steel, cut with reamers for consistency, and then nitrided to help them last a lifetime.

HEADSPACE GAUGES

Headspace gauges don’t need the be complicated, they just need to be correct, and exceedingly consistent. This led us to a traditional datum-style gauge – as we believe it provides the most true measurement – cut with a reamer to keep our diameter, face, and radius as consistent as possible. Again, this is in an effort to allow you to compare your measurements with someone from North Dakota or Nevada or the Netherlands, knowing that the numbers on your caliper mean something.

Included Sizes: .330, .350, .375, .400, .420, Rimfire

The post ZERO Headspace and Ogive Measurement Gauge Kit appeared first on Delta Tactical.

The Area 419 billet aluminum powder funnel uses a system of interchangeable, caliber specific, heads to make it the ultimate funnel for reloaders available today.  Universal plastic powder funnels have several issues that are solved with this system.

1.  Static cling, plastic is prone to being charged with static and kernels of powder will stick to the walls causing you to have to tap the funnel to get them all to fall.
2.  No such thing as universal.  There are always cases that just wont work well with the universal design, and funnels tip off and spill powder, or they just plain wont work.
3.  Universal means that it has a hole meant for 22 caliber.  So if you are trying to dump 90 grains into a big magnum, you are waiting a long time for the powder to fill.

The Area 419 Funnel’s interchangeable heads thread onto the funnel and are neck diameter specific for each caliber (color coded to keep track of them).  The do not rely on fitting over the body of the case to hold in place.  They are sized slightly larger than the neck diameter so that they hold solid on the case.  Each head has a bore sized a few thousandths smaller than the bullet diameter, so maximum flow is achieved for each caliber.  This is huge for the super ultra magnum guys (375 Cheytac, 408 Cheytac, 50 BMG, etc).  The interface between the heads and the funnel is designed in such a way that no kernels can ever get stuck between the two, as long as the head is tightened completely.

The Funnel’s design is both aesthetic and performance driven.  Being machined from a solid billet of 6061-T6 aluminum means no static charge to cling kernels to the funnel walls.  This also makes it far safer for use with black powder.

• “Flutes” on the outside are for looks, on the inside though, they disturb the powder kernels from trying to jam up at the neck.  It also gives some airspace so they do not get packed up so tightly, all aimed to increase flow through the nozzle.
• 3/8″ tall straight section at the top to help prevent kernels of powder from bouncing out when poured in.
• Smooth surfaces at the neck of the funnel and inside the heads promote quick flow and prevent any sticking kernels.
• MADE IN USA! From USA made aluminum, on a USA made HAAS mill, with USA made cutting tools!

The post 50 Cal Interchangeable Funnel Head appeared first on Delta Tactical.

The Area 419 billet aluminum powder funnel uses a system of interchangeable, caliber specific, heads to make it the ultimate funnel for reloaders available today.  Universal plastic powder funnels have several issues that are solved with this system.

1.  Static cling, plastic is prone to being charged with static and kernels of powder will stick to the walls causing you to have to tap the funnel to get them all to fall.
2.  No such thing as universal.  There are always cases that just wont work well with the universal design, and funnels tip off and spill powder, or they just plain wont work.
3.  Universal means that it has a hole meant for 22 caliber.  So if you are trying to dump 90 grains into a big magnum, you are waiting a long time for the powder to fill.

The Area 419 Funnel’s interchangeable heads thread onto the funnel and are neck diameter specific for each caliber (color coded to keep track of them).  The do not rely on fitting over the body of the case to hold in place.  They are sized slightly larger than the neck diameter so that they hold solid on the case.  Each head has a bore sized a few thousandths smaller than the bullet diameter, so maximum flow is achieved for each caliber.  This is huge for the super ultra magnum guys (375 Cheytac, 408 Cheytac, 50 BMG, etc).  The interface between the heads and the funnel is designed in such a way that no kernels can ever get stuck between the two, as long as the head is tightened completely.

The Funnel’s design is both aesthetic and performance driven.  Being machined from a solid billet of 6061-T6 aluminum means no static charge to cling kernels to the funnel walls.  This also makes it far safer for use with black powder.

• “Flutes” on the outside are for looks, on the inside though, they disturb the powder kernels from trying to jam up at the neck.  It also gives some airspace so they do not get packed up so tightly, all aimed to increase flow through the nozzle.
• 3/8″ tall straight section at the top to help prevent kernels of powder from bouncing out when poured in.
• Smooth surfaces at the neck of the funnel and inside the heads promote quick flow and prevent any sticking kernels.
• MADE IN USA! From USA made aluminum, on a USA made HAAS mill, with USA made cutting tools!

The post 30 Cal Interchangeable Funnel Head appeared first on Delta Tactical.

The Area 419 billet aluminum powder funnel uses a system of interchangeable, caliber specific, heads to make it the ultimate funnel for reloaders available today.  Universal plastic powder funnels have several issues that are solved with this system.

1.  Static cling, plastic is prone to being charged with static and kernels of powder will stick to the walls causing you to have to tap the funnel to get them all to fall.
2.  No such thing as universal.  There are always cases that just wont work well with the universal design, and funnels tip off and spill powder, or they just plain wont work.
3.  Universal means that it has a hole meant for 22 caliber.  So if you are trying to dump 90 grains into a big magnum, you are waiting a long time for the powder to fill.

The Area 419 Funnel’s interchangeable heads thread onto the funnel and are neck diameter specific for each caliber (color coded to keep track of them).  The do not rely on fitting over the body of the case to hold in place.  They are sized slightly larger than the neck diameter so that they hold solid on the case.  Each head has a bore sized a few thousandths smaller than the bullet diameter, so maximum flow is achieved for each caliber.  This is huge for the super ultra magnum guys (375 Cheytac, 408 Cheytac, 50 BMG, etc).  The interface between the heads and the funnel is designed in such a way that no kernels can ever get stuck between the two, as long as the head is tightened completely.

The Funnel’s design is both aesthetic and performance driven.  Being machined from a solid billet of 6061-T6 aluminum means no static charge to cling kernels to the funnel walls.  This also makes it far safer for use with black powder.

• “Flutes” on the outside are for looks, on the inside though, they disturb the powder kernels from trying to jam up at the neck.  It also gives some airspace so they do not get packed up so tightly, all aimed to increase flow through the nozzle.
• 3/8″ tall straight section at the top to help prevent kernels of powder from bouncing out when poured in.
• Smooth surfaces at the neck of the funnel and inside the heads promote quick flow and prevent any sticking kernels.
• MADE IN USA! From USA made aluminum, on a USA made HAAS mill, with USA made cutting tools!

The post 7MM Interchangeable Funnel Head (Copy) appeared first on Delta Tactical.

The Area 419 billet aluminum powder funnel uses a system of interchangeable, caliber specific, heads to make it the ultimate funnel for reloaders available today.  Universal plastic powder funnels have several issues that are solved with this system.

1.  Static cling, plastic is prone to being charged with static and kernels of powder will stick to the walls causing you to have to tap the funnel to get them all to fall.
2.  No such thing as universal.  There are always cases that just wont work well with the universal design, and funnels tip off and spill powder, or they just plain wont work.
3.  Universal means that it has a hole meant for 22 caliber.  So if you are trying to dump 90 grains into a big magnum, you are waiting a long time for the powder to fill.

The Area 419 Funnel’s interchangeable heads thread onto the funnel and are neck diameter specific for each caliber (color coded to keep track of them).  The do not rely on fitting over the body of the case to hold in place.  They are sized slightly larger than the neck diameter so that they hold solid on the case.  Each head has a bore sized a few thousandths smaller than the bullet diameter, so maximum flow is achieved for each caliber.  This is huge for the super ultra magnum guys (375 Cheytac, 408 Cheytac, 50 BMG, etc).  The interface between the heads and the funnel is designed in such a way that no kernels can ever get stuck between the two, as long as the head is tightened completely.

The Funnel’s design is both aesthetic and performance driven.  Being machined from a solid billet of 6061-T6 aluminum means no static charge to cling kernels to the funnel walls.  This also makes it far safer for use with black powder.

• “Flutes” on the outside are for looks, on the inside though, they disturb the powder kernels from trying to jam up at the neck.  It also gives some airspace so they do not get packed up so tightly, all aimed to increase flow through the nozzle.
• 3/8″ tall straight section at the top to help prevent kernels of powder from bouncing out when poured in.
• Smooth surfaces at the neck of the funnel and inside the heads promote quick flow and prevent any sticking kernels.
• MADE IN USA! From USA made aluminum, on a USA made HAAS mill, with USA made cutting tools!

The post 6.5 Interchangeable Funnel Head appeared first on Delta Tactical.

The Area 419 billet aluminum powder funnel uses a system of interchangeable, caliber specific, heads to make it the ultimate funnel for reloaders available today.  Universal plastic powder funnels have several issues that are solved with this system.

1.  Static cling, plastic is prone to being charged with static and kernels of powder will stick to the walls causing you to have to tap the funnel to get them all to fall.
2.  No such thing as universal.  There are always cases that just wont work well with the universal design, and funnels tip off and spill powder, or they just plain wont work.
3.  Universal means that it has a hole meant for 22 caliber.  So if you are trying to dump 90 grains into a big magnum, you are waiting a long time for the powder to fill.

The Area 419 Funnel’s interchangeable heads thread onto the funnel and are neck diameter specific for each caliber (color coded to keep track of them).  The do not rely on fitting over the body of the case to hold in place.  They are sized slightly larger than the neck diameter so that they hold solid on the case.  Each head has a bore sized a few thousandths smaller than the bullet diameter, so maximum flow is achieved for each caliber.  This is huge for the super ultra magnum guys (375 Cheytac, 408 Cheytac, 50 BMG, etc).  The interface between the heads and the funnel is designed in such a way that no kernels can ever get stuck between the two, as long as the head is tightened completely.

The Funnel’s design is both aesthetic and performance driven.  Being machined from a solid billet of 6061-T6 aluminum means no static charge to cling kernels to the funnel walls.  This also makes it far safer for use with black powder.

• “Flutes” on the outside are for looks, on the inside though, they disturb the powder kernels from trying to jam up at the neck.  It also gives some airspace so they do not get packed up so tightly, all aimed to increase flow through the nozzle.
• 3/8″ tall straight section at the top to help prevent kernels of powder from bouncing out when poured in.
• Smooth surfaces at the neck of the funnel and inside the heads promote quick flow and prevent any sticking kernels.
• MADE IN USA! From USA made aluminum, on a USA made HAAS mill, with USA made cutting tools!

The post 22 Cal Interchangeable Funnel Head appeared first on Delta Tactical.

The Area 419 billet aluminum powder funnel uses a system of interchangeable, caliber specific, heads to make it the ultimate funnel for reloaders available today.  Universal plastic powder funnels have several issues that are solved with this system.

1.  Static cling, plastic is prone to being charged with static and kernels of powder will stick to the walls causing you to have to tap the funnel to get them all to fall.
2.  No such thing as universal.  There are always cases that just wont work well with the universal design, and funnels tip off and spill powder, or they just plain wont work.
3.  Universal means that it has a hole meant for 22 caliber.  So if you are trying to dump 90 grains into a big magnum, you are waiting a long time for the powder to fill.

The Area 419 Funnel’s interchangeable heads thread onto the funnel and are neck diameter specific for each caliber (color coded to keep track of them).  The do not rely on fitting over the body of the case to hold in place.  They are sized slightly larger than the neck diameter so that they hold solid on the case.  Each head has a bore sized a few thousandths smaller than the bullet diameter, so maximum flow is achieved for each caliber.  This is huge for the super ultra magnum guys (375 Cheytac, 408 Cheytac, 50 BMG, etc).  The interface between the heads and the funnel is designed in such a way that no kernels can ever get stuck between the two, as long as the head is tightened completely.

The Funnel’s design is both aesthetic and performance driven.  Being machined from a solid billet of 6061-T6 aluminum means no static charge to cling kernels to the funnel walls.  This also makes it far safer for use with black powder.

• “Flutes” on the outside are for looks, on the inside though, they disturb the powder kernels from trying to jam up at the neck.  It also gives some airspace so they do not get packed up so tightly, all aimed to increase flow through the nozzle.
• 3/8″ tall straight section at the top to help prevent kernels of powder from bouncing out when poured in.
• Smooth surfaces at the neck of the funnel and inside the heads promote quick flow and prevent any sticking kernels.
• MADE IN USA! From USA made aluminum, on a USA made HAAS mill, with USA made cutting tools!

The post 6MM Interchangeable Funnel Head appeared first on Delta Tactical.

The Area 419 billet aluminum powder funnel uses a system of interchangeable, caliber specific, heads to make it the ultimate funnel for reloaders available today.  Universal plastic powder funnels have several issues that are solved with this system.

1.  Static cling, plastic is prone to being charged with static and kernels of powder will stick to the walls causing you to have to tap the funnel to get them all to fall.
2.  No such thing as universal.  There are always cases that just wont work well with the universal design, and funnels tip off and spill powder, or they just plain wont work.
3.  Universal means that it has a hole meant for 22 caliber.  So if you are trying to dump 90 grains into a big magnum, you are waiting a long time for the powder to fill.

The Area 419 Funnel’s interchangeable heads thread onto the funnel and are neck diameter specific for each caliber (color coded to keep track of them).  The do not rely on fitting over the body of the case to hold in place.  They are sized slightly larger than the neck diameter so that they hold solid on the case.  Each head has a bore sized a few thousandths smaller than the bullet diameter, so maximum flow is achieved for each caliber.  This is huge for the super ultra magnum guys (375 Cheytac, 408 Cheytac, 50 BMG, etc).  The interface between the heads and the funnel is designed in such a way that no kernels can ever get stuck between the two, as long as the head is tightened completely.

The Funnel’s design is both aesthetic and performance driven.  Being machined from a solid billet of 6061-T6 aluminum means no static charge to cling kernels to the funnel walls.  This also makes it far safer for use with black powder.

• “Flutes” on the outside are for looks, on the inside though, they disturb the powder kernels from trying to jam up at the neck.  It also gives some airspace so they do not get packed up so tightly, all aimed to increase flow through the nozzle.
• 3/8″ tall straight section at the top to help prevent kernels of powder from bouncing out when poured in.
• Smooth surfaces at the neck of the funnel and inside the heads promote quick flow and prevent any sticking kernels.
• MADE IN USA! From USA made aluminum, on a USA made HAAS mill, with USA made cutting tools!

The post 270 Cal Interchangeable Funnel Head appeared first on Delta Tactical.

(6) Caliber Specific Color Coded Heads (22 cal, 6mm/243, 6.5mm/264, 7mm/284, 30 cal, 338 cal)  Calibers outside this list must be added separately, not part of a kit, please click link at left.

(1) Billet Storage Block

Drop tubes can be added but are NOT INCLUDED with the kit

The Area 419 billet aluminum powder funnel uses a system of interchangeable, caliber specific, heads to make it the ultimate funnel for reloaders available today.

Universal plastic powder funnels have several issues that are solved with this system:

1.  Static cling.  Plastic is prone to being charged with static and kernels of powder will stick to the walls causing you to have to tap the funnel to get them all to fall.
2.  No such thing as universal.  There are always cases that just wont work well with the universal design, and funnels tip off and spill powder, or they just plain wont fit.
3.  Universal means that it has a hole meant for 22 caliber.  So if you are trying to dump 90 grains into a big magnum, you are waiting a long time for the powder to fill.

The Area 419 Funnel’s interchangeable heads thread onto the funnel and are neck-diameter specific for each caliber.  They do not rely on fitting over the body of the case to hold in place.  They are sized slightly larger than the neck diameter so that they hold solid on the case.  Each head has a bore sized a few thousandths smaller than the bullet diameter, so maximum flow is achieved for each caliber.  This is huge for the super ultra magnum guys (375 Cheytac, 408 Cheytac, 50 BMG, etc).  The interface between the heads and the funnel is designed in such a way that no kernels can ever get stuck between the two, as long as the head is tightened completely.

The Funnel’s design is both aesthetic and performance driven.  Being machined from a solid billet of 6061-T6 aluminum means no static charge to cling kernels to the funnel walls.  This also makes it far safer for use with black powder.

“Flutes” on the outside are for looks, on the inside though, they disturb the powder kernels from trying to jam up at the neck.  It also gives some airspace so they do not get packed up so tightly, all aimed to increase flow through the nozzle.

3/8″ tall straight section at the top to help prevent kernels of powder from bouncing out when poured in.

Smooth surfaces at the neck of the funnel and inside the heads promote quick flow and prevent any sticking kernels.

NEW!  Machined in handles to give you a grip if you like to grab the funnel from the side instead of top.  Symmetrical design means the funnel no longer tips to the side.

MADE IN USA! From USA made aluminum, on a USA made HAAS mill, with USA made cutting tools!

Billet Storage Block

Machined in house from a solid billet of 6061-T6 aluminum, every single surface of the block is machined.

Holds the funnel with or without a head attached as well as 10 spots for heads or drop tubes to be stored

Front six head storage locations are engraved for standard calibers as well as color coded to match the funnel heads anodizing

Rubber feet on the bottom keep from sliding around on your bench

The post Master Funnel Kit appeared first on Delta Tactical.