For Anschutz Archives | Delta Tactical

Anschutz 1761 Scope Base, 15MOA

Danny Boj — Thu, 30 May 2024 03:31:14 +0000

Anschutz 1761 Scope Base, 15MOA

Following the success of our CZ455 and 457 scope bases, it only made sense for us to begin to roll out bases for Anschutz rifles.

This design, made from a single piece of T7075 aluminum and machined in house on our Haas VF4SS 4 axis machining center is designed to slide onto the dovetail and be clamped down with a force that is consistent across the entire rail – and strong enough that your rimfire will never budge it. Bases will come Type III black hardcoat anodized and will come with the necessary wrench for torquing the clamp screws.

Recommended torque spec: 22 in/lb (2.5 NM)

Our rail comes in a 30MOA cant as it is meant for guys pushing their 22LRs out to 300+ yards or using optics with a minimum of 60MOA internal elevation, zeroing at 50y. We added real estate to the front of the rail to allow you to move your optic forward. This helps on higher powered scopes when coupled with the smaller stocks that are normal on a rimfire. This base is a little taller than the popular set-screw models (our rail adds a total of about 1/2″ of height to the dovetail) but by using lower height rings/mounts you should be able to retain a similar over bore height and maintain a good cheek weld without any riser.

Since we are good guys, and the machine would already be working in the area, we decided to build in a level to the base. The material is flared out in the area to provide optimum viewing when in the prone position without much movement if any.

The post Anschutz 1761 Scope Base, 15MOA appeared first on Delta Tactical.

Anschutz 1761 Scope Base, 30MOA

delta-admin — Tue, 30 Jun 2020 03:33:11 +0000

Anschutz 1761 Scope Base, 30MOA

Following the success of our CZ455 and 457 scope bases, it only made sense for us to begin to roll out bases for Anschutz rifles.

Recommended torque spec: 22 in/lb (2.5 NM)

The post Anschutz 1761 Scope Base, 30MOA appeared first on Delta Tactical.

16001 Extended Anschutz 64 Picatinny Rail (16001-M)

delta-admin — Sun, 28 Oct 2018 13:55:58 +0000

Finally! A dovetail to Picatinny scope mount for the Anschutz 64″ 17HMR/22WMR action built with the shooter in mind! We asked, and then listened to your suggestions and came up with what we think most shooters can use on the Anschutz rifle. Made from 6061 billet on CNC mills. Extended past the Anschutz **receiver to make scope position easy for what ever shooting position you shoot from the most, be it prone, bench or standing. Fits ALL current and older magnum models with the full dovetail cut receivers.

Approximately 9.15mm tall
*Fits the Weatherby MKII XXII with the Anschutz 64 action also
Made in the USA

The post 16001 Extended Anschutz 64 Picatinny Rail (16001-M) appeared first on Delta Tactical.

Anschutz Bolt Handle – the Executive (16011)

delta-admin — Thu, 02 Apr 2015 03:33:22 +0000

DIP Inc. Anschutz Bolt Handle – the Executive (16011)

The Anschutz bolt handle can now be fitted with the “Executive” bolt knob. Machined from aircraft aluminum and hard coat anodized for a well made contoured handle. Easy to install and helps make bolt operation smooth as silk. Simple easy installation, no gunsmith required.

Fits any 54 or 64 action bolts that are factory threaded.

6061 Aircraft Aluminum
Hard Anodized
OAL – Approx 1.3″
Diameter – Approx .8″

The post Anschutz Bolt Handle – the Executive (16011) appeared first on Delta Tactical.

Anschutz Smooth Bolt Handle (16009)

delta-admin — Thu, 02 Apr 2015 03:26:49 +0000

DIP Inc. Anschutz Smooth Bolt Handle (16009)

Designed for the Anschutz as a direct replacement to the tiny round knob that comes on the Anschutz rifle. The long bolt handle makes it easy to chamber tight ammo like CCI subsonic in your Anschutz. Ergonomically designed for easy bolt handle control when closing the bolt of your Anschutz. Easy to install for that custom look.

Fits any 54 or 64 action bolts that are factory threaded.

6061 Aircraft Aluminum
Hard Anodized
OAL – Approx 1.5″
Diameter – Approx .62″

The post Anschutz Smooth Bolt Handle (16009) appeared first on Delta Tactical.

Anschutz Knurled Bolt Knob (16008)

delta-admin — Thu, 02 Apr 2015 03:17:46 +0000

DIP Inc. Anschutz Knurled Bolt Knob (16008)

Designed for the Anschutz as a direct replacement to the tiny round knob that comes on the Anschutz rifle. The long bolt handle makes it easy to chamber tight ammo like CCI subsonic in your Anschutz. Ergonomically designed knurled knob with 4 grooves for easy bolt handle control when closing the bolt of your Anschutz rifle.

Fits any 54 or 64 action bolts that are factory threaded.

5/8″(16mm) Diameter
1.5″(38mm) Long

6061 Aircraft Aluminum
Hard Anodized
OAL – Approx 1.5″
Diameter – Approx .62″

The post Anschutz Knurled Bolt Knob (16008) appeared first on Delta Tactical.

Anschutz Bolt Handle (16006)

delta-admin — Thu, 02 Apr 2015 03:09:41 +0000

DIP Inc. Anschutz Bolt Handle (16006)

Designed for the Anschutz as a direct replacement to the tiny round knob that comes on the Anschutz rifle. The extra large bolt handle makes it easy to chamber tight re-sized ammo in your Anschutz. Ergonomically designed for easy bolt handle control when closing the bolt of your Anschutz rifle.

Fits any 54 or 64 action bolts that are factory threaded.

6061 Aircraft Aluminum
Hard Anodized
OAL – Approx 1.6″
Diameter – Approx 1″

The post Anschutz Bolt Handle (16006) appeared first on Delta Tactical.

Extended Anschutz 54 Picatinny Rail (16005)

delta-admin — Sun, 02 Feb 2014 01:16:35 +0000

The NEW extended dovetail to Picatinny adapter for the Anschutz 54 22lr action built by shooters for shooters. We asked, and then listened to your suggestions and came up with what we think most shooters can use. Made from 6061 billet on CNC milling machines. Adds 2 slots past the muzzle end of the Anschutz 54 receiver. Held in place with the 4 supplied TORX drive screws.

Made in the USA

The post Extended Anschutz 54 Picatinny Rail (16005) appeared first on Delta Tactical.

16001 Extended Anschutz 64 Picatinny Rail (16001)

delta-admin — Sat, 01 Feb 2014 06:09:30 +0000

Finally! A dovetail to Picatinny scope mount for the Anschutz 64″ 22lr action built with the shooter in mind! We asked, and then listened to your suggestions and came up with what we think most shooters can use on the Anschutz rifle. Made from 6061 billet on CNC mills. Extended past the Anschutz **receiver to make scope position easy for what ever shooting position you shoot from the most, be it prone, bench or standing. Fits ALL current and older 22LR models with the full dovetail cut receivers.

Approximately 9.15mm tall

*Fits the Weatherby MKII XXII with the Anschutz 64 action also

Made in the USA

The post 16001 Extended Anschutz 64 Picatinny Rail (16001) appeared first on Delta Tactical.

16007 25MOA Extended Anschutz 54 Picatinny Rail (16007)

delta-admin — Sat, 01 Feb 2014 04:32:37 +0000

Finally! A dovetail to Picatinny adapter for the Anschutz *54 22lr action built by shooters for shooters. We asked, and then listened to your suggestions and came up with what we think most shooters can use. Made from 6061 billet on CNC milling machines here in the US. Adds 2 slots past the muzzle end of the factory drilled & taped Anschutz 54 receiver.

*Will not fit 54 square or Match actions receivers. Approximately .36” tall

Made in the USA

The post 16007 25MOA Extended Anschutz 54 Picatinny Rail (16007) appeared first on Delta Tactical.