For Sako1636010520 Archives | Delta Tactical

Sako Quad Scope Base – 30MOA

Danny Boj — Mon, 08 May 2023 10:21:46 +0000

When we set out to build this we wanted to solve the problem of Sako dovetail scope bases that slide around over time. The simple dovetail/set screw bases work for some people but we weren’t happy.

This design, made from a single piece of T7075 aluminum and machined in house on our Haas VF4SS 4 axis machining center is designed to slide onto the dovetail and be clamped down with a force that is consistent across the entire rail – and strong enough that your Sako Quad will never budge it. For added security we have added a recoil lug at the rear of the base, creating a mechanical stop for the base. Bases will come Type III black hardcoat anodized and will come with the necessary 3mm hex key for torquing the clamp screws. Recommended torque spec: 22 in/lb (2.5 NM)

Our rail comes in a 30MOA cant as it is meant for guys pushing their rimfires out to 300+ yards. We also added real estate to the front of the rail to allow you to move your optic forward. This helps on higher powered scopes when coupled with the smaller stocks that are normal on a rimfire. This base is a little taller than the popular set-screw models (our rail adds a total of about 1/2″ of height to the dovetail) but by using lower height rings/mounts you should be able to retain a similar over bore height and maintain a good cheek weld without any riser.

Since we are good guys, and the machine would already be working in the area, we decided to build in a level to the base. The material is flared out in the area to provide optimum viewing when in the prone position without much movement if any.

The post Sako Quad Scope Base – 30MOA appeared first on Delta Tactical.

Tikka T1X Scope Mount 25MOA

delta-admin — Mon, 21 Jan 2019 08:53:42 +0000

Convert your stock Tikka T1X dovetail to a 25MOA Picatinny scope rail. Great for quick release rings so you can easily swap optics between the Tikka and other rifles. The supplied TORX drive screws hold the mount firmly to the factory drilled & Tapped receiver. Works great for those shooters who want to “zero” their 22LR out to 300yrds for long range practice.

No gunsmith, drilling or tapping required for installation.

Recommended tools:

#15 TORX(Star)
Purple LocTite
Inch pound torque wrench

Image shown unfinished. Rail will be black coated when shipped

6061 Aircraft Aluminum
Mounting Screw Torque – 7-8 inch pounds
Mil Spec Hard Coat Anodized
Adds approximately .360″(9mm) height to the receiver

The post Tikka T1X Scope Mount 25MOA appeared first on Delta Tactical.

Tikka T1X Scope Mount

delta-admin — Mon, 21 Jan 2019 08:48:29 +0000

Convert your stock Tikka T1X dovetail to a standard Picatinny scope rail. Great for quick release rings so you can easily swap optics between the Tikka and other rifles. The supplied TORX drive screws hold the mount firmly to the factory drilled & Tapped receiver.

No gunsmith, drilling or tapping required for installation.

Fits ALL rimfire calibers

Recommended tools:
#15 TORX(Star)
Purple LocTite
Inch pound torque wrench

Made in the USA

The post Tikka T1X Scope Mount appeared first on Delta Tactical.

Sako Finnfire Tactical Knurled Bolt Handle (17023)

delta-admin — Thu, 02 Apr 2015 08:00:09 +0000

DIP Inc. Sako Finnfire Tactical Knurled Bolt Handle (17023)

Upgrade the factory Finnfire(P94S) bolt handle to a sleek, easy to grab, slightly over-length handle made here in the US.

The knurled finish with 4 grooves makes it much easier to hold in wet conditions.

Stainless steel adapter and matte black hard anodized knob to complement your Finnfire for that custom look.

The post Sako Finnfire Tactical Knurled Bolt Handle (17023) appeared first on Delta Tactical.

Sako Quad Trigger Shoe Kit (17005)

delta-admin — Thu, 02 Apr 2015 07:48:20 +0000

DIP Inc. Sako Quad Trigger Shoe Kit (17005)

Our Trigger Shoe is CNC’ed here in the Northwest from virgin 6061 billet stock then anodized for a lasting finish.

Attaches easily to the factory Quad trigger blade with the two supplied Allen set screws.

Great for bench rest or to help with pest control.

No gunsmithing required.

The post Sako Quad Trigger Shoe Kit (17005) appeared first on Delta Tactical.

17035 Sako Finnfire Trigger Shoe Kit (17035)

delta-admin — Sun, 02 Feb 2014 18:47:50 +0000

Our Trigger Shoe is CNC’ed here in the Northwest from virgin 6061 billet stock then anodized for a lasting finish. Attaches easily to the factory Finnfire trigger blade with the two supplied Allen set screws. Great for bench rest or to help with pest control. No gunsmithing required.

Made in the USA

The post 17035 Sako Finnfire Trigger Shoe Kit (17035) appeared first on Delta Tactical.

Sako Finnfire Smooth Bolt Handle (17022)

delta-admin — Sun, 02 Feb 2014 04:19:00 +0000

Upgrade the factory Finnfire bolt handle to a sleek, easy to grab and operate knob made here in the USA. The smooth finish helps prevent snagging on cloths and won’t rub you the wrong way. Stainless steel adapter and matte black hard anodized knob to complement your Finnfire for that custom look.

Made in the USA

The post Sako Finnfire Smooth Bolt Handle (17022) appeared first on Delta Tactical.

Sako Quad Tactical Bolt Handle (17017)

delta-admin — Sun, 02 Feb 2014 04:15:32 +0000

Upgrade the factory plastic Sako Quad bolt handle to a large, easy to grab, oversized handle. The oversized and added weight feels more like a larger caliber rifle. Stainless steel adapter and matte black hard anodized knob easily installed to complement your Sako Quad for that custom look.

Made in the USA

The post Sako Quad Tactical Bolt Handle (17017) appeared first on Delta Tactical.

17019 Sako Quad Smooth Bolt Handle (17019)

delta-admin — Sun, 02 Feb 2014 04:09:15 +0000

Upgrade the factory plastic Sako Quad bolt handle to a sleek, easy to grab, slightly oversized handle made here in the US. The oversized and smooth finish feels more like a larger caliber rifle. Stainless steel adapter and matte black hard anodized knob to complement your Sako Quad for that custom look.

Made in the USA

The post 17019 Sako Quad Smooth Bolt Handle (17019) appeared first on Delta Tactical.

17007 Sako Quad/FinnII Billet Aluminium Trigger Guard (17007)

delta-admin — Sun, 02 Feb 2014 03:48:21 +0000

For Sako Quad and Finnfire II

A great improvement over the factory plastic Sako Quad trigger guard. Makes it easier to repeat torque setting on the action screws of your Sako Quad and allows for precise bedding. The aluminum Sako Trigger guard is CNC machined from solid billet and made here in the Northwest.

Made in the USA

The post 17007 Sako Quad/FinnII Billet Aluminium Trigger Guard (17007) appeared first on Delta Tactical.