Upgrade Your AT-X for Long Range Performance

*Only required for the AT-X Rifle in order to align with the full length Forend Rail.
**Upgrade your Accuracy International AT-X Short Action with the WIN Tactical 20 MOA Action Rail Assembly. Ideal for long-range optics, thermal clip-ons and precision rifle applications.If you have the AT-XC Rifle, you do not require this item as the Factory Rail aligns.

The Action Rail Assembly is designed to enhance the capability of the Accuracy International AT-X by providing a rigid, extended optics mounting platform with an integrated 20 MOA incline.

For shooters pushing beyond traditional distances, additional elevation can be critical in maximizing the available adjustment range within modern optics. A 20 MOA rail effectively shifts the scope’s optical centre, preserving valuable elevation travel for long-range shooting.

Designed Specifically for the AT-X Short Action

Unlike generic Picatinny rails, this rail assembly is engineered specifically for:

Accuracy International AT-X Short Action

Benefits include:

✔ Precise fitment
✔ Correct rail alignment
✔ Factory-style appearance
✔ Seamless integration with AT-X accessories
✔ Enhanced rigidity and stability

The result is a professional-grade solution that complements the premium engineering of the AT-X platform.

20 MOA Elevation Built In

Why 20 MOA Matters

A 20 MOA rail is designed to maximise the available elevation adjustment within your optic.

Benefits include:

• More usable elevation travel
• Better long-range performance
• Reduced reliance on reticle holdovers
• Improved compatibility with ELR shooting applications
• Enhanced flexibility when using modern precision rifle optics

This makes the rail particularly valuable for shooters engaging targets beyond 800 metres.

Perfect for Modern Optics

The extended rail platform is ideal for:

Precision Rifle Scopes

• Zero Compromise Optic
• Tangent Theta
• Nightforce ATACR
• Schmidt & Bender PM II
• Vortex Razor HD Gen III

Clip-On Systems

• Thermal clip-ons
• Night vision clip-ons
• Observation devices

The additional mounting length provides greater flexibility when positioning optics and accessories.

Continuous Rail Alignment

One of the major advantages of the WIN Tactical rail system is its ability to align correctly with AT-X bridge and accessory rail configurations.

This provides:

✔ Consistent optic alignment
✔ Better clip-on compatibility
✔ Increased mounting versatility
✔ Improved system integration

Shooters running thermal or night vision clip-ons particularly benefit from a properly aligned continuous rail system.

Precision Machined Construction

Manufactured to the standards expected by Accuracy International owners, the rail features:

• Precision-machined aluminium construction
• Hard-anodised finish
• Lightweight design
• Corrosion resistance
• Exceptional rigidity

Built to withstand hard competition use and harsh field conditions.

Ideal for Competition & Hunting

PRS & NRL Competition

• Increased optic flexibility
• Better accessory integration
• Enhanced long-range capability

Long Range Hunting

• Thermal clip-on compatibility
• Extended mounting solutions
• Better optic positioning

Professional Applications

• Observation devices
• Night vision systems
• Multi-device mounting solutions

Key Features

✔ Designed specifically for Accuracy International AT-X Short Action rifles
✔ Extended 20 MOA Picatinny rail platform
✔ Improved long-range optic setup capability
✔ Ideal for thermal and night vision systems
✔ Precision-machined aluminium construction
✔ Hard-anodised finish
✔ Factory-style integration
✔ Enhanced optic mounting flexibility
✔ Lightweight yet extremely durable
✔ Suitable for competition, hunting and professional applications

Specifications

Ideal For

• Accuracy International AT-X owners
• PRS competitors
• Long-range shooters
• ELR enthusiasts
• Thermal hunters
• Night vision users
• Professional end users

What’s in the Box

• 20 MOA Action Rail Assembly
• Mounting Hardware
• Installation Components

(Contents may vary depending on manufacturer revisions.)

Why Buy From Delta Tactical

Delta Tactical specialises in premium Accuracy International rifles and accessories.

When you purchase from us you receive:

✔ Genuine WIN Tactical products
✔ Expert Accuracy International support
✔ Fast Australian shipping
✔ Local after-sales service
✔ Competition and hunting expertise

Comparison Table: Factory AT-X Rail vs WIN Tactical Action Rail vs WIN Tactical Long Forend Rail

The post 20 MOA Action Rail Assembly – Accuracy International AT-X Short Action appeared first on Delta Tactical.

Area 419 SEND iT Gen 2 Adapter

Mount It Your Way

The SEND iT Gen 2 Adapter is designed to work seamlessly with the Gen 2 electronic level, giving shooters the ability to mount and position their level exactly where it works best.

Whether you’re running a competition rifle, hunting setup or precision build, this adapter provides a solid, low-profile interface between your SEND iT and your mounting system.

Flexible Positioning for Any Setup

With the Gen 2 adapter, you can mount your SEND iT in multiple positions depending on your rifle configuration and personal preference.

It allows:

• Vertical mounting (up or down)
• Multiple mounting positions on compatible Area 419 mounts
• Clean integration with existing rifle setups

This flexibility ensures your level is always visible, accessible and optimally positioned.

Purpose-Built for the Gen 2 System

This adapter is specifically designed for the SEND iT Gen 2, ensuring:

• Secure fitment
• Proper alignment
• Reliable performance under recoil

It integrates directly with Area 419 mounting systems, maintaining the premium fit and finish expected from their products.

Key Features

✔ Designed specifically for SEND iT Gen 2
✔ Enables multiple mounting positions
✔ Supports vertical orientation (up/down)
✔ Compatible with Area 419 mounting systems
✔ Low-profile, lightweight design
✔ Durable construction for field and competition use

Specifications

Compatibility

This adapter is designed to be used with:

• Area 419 SEND iT Gen 2 Electronic Level
• Compatible Area 419 mounting systems and rings

⚠️ Note: This listing is for the adapter only.
SEND iT Gen 2 level and mounts are sold separately.

Ideal For

• Shooters running Area 419 mounting systems
• PRS and long-range shooters wanting optimal level placement
• Precision rifle builds requiring clean, modular setups

What’s in the Box

• SEND iT Gen 2 Adapter
• Mounting hardware

Why Buy From Delta Tactical

At Delta Tactical, we supply precision rifle components trusted by serious shooters.

When you purchase from us you receive:

✔ Genuine premium products
✔ Fast Australian shipping
✔ Expert advice from experienced shooters

The post Send iT Gen 2 Adapter for Area 419 Rings and Mounts appeared first on Delta Tactical.

The RUSAN Picatinny Rail – 20 MOA is a precision-engineered optics mounting solution purpose-built for CZ rimfire and centrefire platforms, including the 452, 453, 455, 457, 512 and 515.

Featuring a 20 MOA forward cant, this rail allows shooters to retain valuable scope elevation adjustment, making it ideal for long-range rimfire, PRS-style competition, and precision hunting applications. By shifting the optic’s usable adjustment range, shooters gain improved ballistic flexibility and consistency at extended distances.

Manufactured to Rusan’s exacting standards, the rail delivers rock-solid stability, repeatable zero retention, and precise optic alignment. The Picatinny profile ensures compatibility with a wide range of modern scope mounts, providing a reliable upgrade for shooters seeking maximum performance from their CZ rifle.

Whether you’re building a competition-ready rimfire or refining a precision setup, the RUSAN Picatinny Rail delivers confidence where accuracy matters most.

🔹 Key Features

• 20 MOA cant for increased elevation travel

• Designed specifically for CZ rifles

• Precision CNC-machined for consistent fit and alignment

• Picatinny profile compatible with modern scope mounts

• Improves long-range and precision shooting capability

• Durable construction for repeatable zero retention

🔹 Compatible Rifles

• CZ 452

• CZ 453

• CZ 455

• CZ 457

• CZ 512

• CZ 515

🔹 Specifications

🔹 Ideal For

• Long-range rimfire shooting

• PRS / NRL22 style competition

• Precision hunting setups

• Shooters needing additional scope elevation

• High-end optics and mounts

The post Picatinny Rail CZ 452 / 453 / 455 / 457 / 512 / 515 – 20 MOA appeared first on Delta Tactical.

• Designed for most 34 mm LPVO scopes, this model mounts your optic and transforms it into an advanced fire control system.

• On-board sensors (temperature, pressure, humidity, pitch, roll, heading) feed into the integrated Applied Ballistics® solver to compute a precision compensated aiming point overlay.

• Daylight-readable green symbology display is user-customisable and overlays your scope reticle, but if power fails your original reticle remains zeroed and usable.

• Built tough: machined from 7075-T6 billet aluminium with Type III hard-anodised finish, waterproof up to 3 ft (91 cm) for 30 minutes, and rated for –40 °F to +140 °F (–40 °C to +60 °C) depending on battery.

• Weight & footprint: 22.6 oz (≈642 g) with batteries; dimensions approx 8.2″ × 2.3″ × 3.0″ (209 × 59 × 77 mm) for this model jacket-size.

• Connectivity & extras: Bluetooth® Low Energy, Near-Field Communication (NFC) and Ultra-Wideband (UWB) modules (each can be disabled) for smartphone companion-app setup and accessory integration.

• Compatibility: Works with standard Picatinny/STANAG 4694 rails and supports most 34 mm LPVOs (both first- and second-focal-plane) according to the compatibility guide.

Whether you’re upgrading a competition rifle, tactical platform, or serious long-range setup, the X4-FCS 34 mm brings next-level fire-control capability while leveraging your existing optic.

Features / Specifications Table

The post Maztech X4-FCS 34 mm – Fire-Control System Mount for 34 mm LPVO appeared first on Delta Tactical.

• The X4-FCS 30mm fits most scopes with a 30 mm tube, replacing your standard scope mount and turning it into an advanced ballistic computer.

• On-board sensors measure temperature, pressure, humidity, weapon pitch/roll/heading, feeding into the integrated Applied Ballistics® solver to compute a compensated aiming point overlay.

• The daylight-readable green symbology display is customizable, allowing you to overlay dynamic aiming cues directly through your scope while retaining your original reticle.

• Designed for durability: machined from 7075-T6 billet aluminium, Type III hard-anodised finish, rated for –40 °F to +140 °F (–40 °C to +60 °C) and immersion in 3 ft (91 cm) of water for 30 minutes.

• Weight & footprint: With batteries installed the unit weighs ~22.6 oz (642 g) and measures ~8.2″ × 2.3″ × 3.0″ (209 × 59 × 77 mm).

• Connectivity features: Bluetooth® Low Energy, Near-Field Communication (NFC) and Ultra-Wideband (UWB) modules (each can be disabled) allow optional smartphone setup and accessory integration.

• Compatibility: Mounts to standard STANAG 4694/Picatinny MIL-STD-1913 rails; supports most 30 mm LPVOs (both first- and second-focal-plane).

Whether you’re upgrading a competition rifle, tactical platform, or serious precision rig, the X4-FCS 30mm brings next-level fire-control capability while using your existing optic.

Features / Specifications Table

The post X4-FCS 30mm – Fire-Control System Mount for 30 mm LPVO appeared first on Delta Tactical.

Engineered for Precision. Built for Reliability. Designed Without Compromise.

When only the best will do, the [Brand Name] Final-Bored Precision Scope Mount delivers an unparalleled fusion of military-grade strength, lightweight design, and obsessive machining precision. Born from the desire to create the most reliable and consistent scope mount on the market, this mount is built for shooters who demand perfection—every time.

Why This Mount Is in a League of Its Own:

✅ Final-Bored as a Matched Set
Each mount is CNC-milled, anodized, fully assembled, torqued to spec, and final-bored in-house as a complete unit. The result? Ring-to-optic contact that’s precise, true, and grip-secure—eliminating shift, stress, or alignment issues found in generic mass-assembled mounts.

✅ Raw Aluminum Internals
The scope contact surfaces are left raw and precision bored, creating an ideal surface for maximum grip and zero optic slippage.

✅ American 7075-T6 Aluminum Construction
CNC-milled in the USA using aerospace-grade 7075 aluminum, delivering 8–9oz of rugged, lightweight strength.

✅ Advanced Mounting Flexibility

• Separate clamping bars for better rail engagement

• Inset mounting feet for optimal picatinny slot alignment

• Multiple accessory ports – perfect for lasers, illuminators, or our Tactical Diving Board™ accessory (patent pending)

✅ Premium Hardware
Fitted with custom nitrided stainless fasteners and steel alignment pins between the cap and base for unmatched structural integrity and repeatability.

Is it Overkill? Maybe. But It’s Done Right.

While most mounts skip the critical final step of post-anodize boring, we double down—eliminating tolerance stack-up and ensuring each unit performs like a custom-machined set. That’s what true consistency requires—and we think that’s worth doing.

📦 Package Includes:

• One [Brand Name] Final-Bored Precision Scope Mount (select model)

• All required stainless mounting hardware

• Torx driver and setup instructions

Perfect For:

• Long-range precision shooters

• Tactical professionals

• Competition marksmen

• Hunters who can’t afford optic failure

The post Cantilevered Tactical One-Piece Scope Mount 30MM appeared first on Delta Tactical.

Engineered for Precision. Built for Reliability. Designed Without Compromise.

When only the best will do, the [Brand Name] Final-Bored Precision Scope Mount delivers an unparalleled fusion of military-grade strength, lightweight design, and obsessive machining precision. Born from the desire to create the most reliable and consistent scope mount on the market, this mount is built for shooters who demand perfection—every time.

Why This Mount Is in a League of Its Own:

✅ Final-Bored as a Matched Set
Each mount is CNC-milled, anodized, fully assembled, torqued to spec, and final-bored in-house as a complete unit. The result? Ring-to-optic contact that’s precise, true, and grip-secure—eliminating shift, stress, or alignment issues found in generic mass-assembled mounts.

✅ Raw Aluminum Internals
The scope contact surfaces are left raw and precision bored, creating an ideal surface for maximum grip and zero optic slippage.

✅ American 7075-T6 Aluminum Construction
CNC-milled in the USA using aerospace-grade 7075 aluminum, delivering 8–9oz of rugged, lightweight strength.

✅ Advanced Mounting Flexibility

• Separate clamping bars for better rail engagement

• Inset mounting feet for optimal picatinny slot alignment

• Multiple accessory ports – perfect for lasers, illuminators, or our Tactical Diving Board™ accessory (patent pending)

✅ Premium Hardware
Fitted with custom nitrided stainless fasteners and steel alignment pins between the cap and base for unmatched structural integrity and repeatability.

Is it Overkill? Maybe. But It’s Done Right.

While most mounts skip the critical final step of post-anodize boring, we double down—eliminating tolerance stack-up and ensuring each unit performs like a custom-machined set. That’s what true consistency requires—and we think that’s worth doing.

📦 Package Includes:

• One [Brand Name] Final-Bored Precision Scope Mount (select model)

• All required stainless mounting hardware

• Torx driver and setup instructions

Perfect For:

• Long-range precision shooters

• Tactical professionals

• Competition marksmen

• Hunters who can’t afford optic failure

The post Cantilevered Tactical One-Piece Scope Mount 34MM appeared first on Delta Tactical.

Elevate your DNT Hydra thermal optic setup with the ADM QD Base — engineered for fast detach and secure reattachment while maintaining a repeatable zero. American Defense Manufacturing’s patented Auto Lock™ Quick Detach Lever system ensures strong rail engagement even on “out-of-spec” picatinny rails — ideal for adapters, bipods, and rail wear.

Machined from 6061-T6 aluminum and finished with Mil-Spec hard coat anodize, this base is built to endure harsh conditions without compromising strength or precision. The mount provides a 1.54″ centerline height, aligning well for both direct view and clip-on deployments.

This base is compatible with Hydra, ThermNight, and ZULUS HD optics — making it a flexible, high-quality mounting solution for your thermal system.

📋 Specifications / Features Table

The post DNT Thermal QD Base appeared first on Delta Tactical.

Looking for a no-fuss way to mount a 1913 Picatinny rail onto a traditional rifle stock—without drilling, gunsmithing, or permanent modification? The BT81 Lil’ Brandi has you covered. Proudly crafted from 7075‑T6 aluminum and finished with Mil‑Spec Type III Class 2 hard coat, this rail adapter simply clamps onto your existing sling stud. It comes with a cross-pin, set-screw, and hex wrench for quick, secure installation.
Featuring three functional Picatinny rail slots, it supports attaching Atlas® Bipods or sling mounts without any hassle. The rail achieves rock-solid stability as the internal angled slot allows the cross-pin to wedge the unit firmly against the stock when the set screw is tightened. This elegant, patent-pending design ensures a snug fit—no disassembly required—while the angled wings with rubber pads protect the stock’s finish. Designed for curved stocks (not flat stocks), the BT81 measures 1.95″ × 1.50″ × 0.663″ and weighs just 0.89 ounces.

The post Lil’ Brandi Sling Stud to Picatinny Rail Adapter appeared first on Delta Tactical.

Stay on target. Stay level. Shoot with total confidence.
The MDT SEND iT Gen2 is the evolution of precision rifle leveling—developed from a shooter’s simple wish: “I never want to take my eye off the target again.” Now nearly 50% smaller, tougher, smarter, and more adaptable, the Gen2 delivers instant LED feedback—no squinting, no shifting your position, no second-guessing.

💡 Why Choose the SEND iT Gen2?

✅ Instant LED Leveling
Green means send it. No more sluggish bubbles—get real-time feedback without breaking focus.

✅ Modular + Compact
Nearly half the size of the original. Configurable button, modular bezel, and multiple mounting options (Picatinny or V-Mount).

✅ Direct-to-Eye LED Option
Includes an ocular fiber optic mounting kit for in-scope LED visibility. Stay level without lifting your head.

✅ All-Season Battery Life
Up to 200 hours on a single CR2032. Set it and forget it for the whole season.

✅ Precision at Every Angle
Multi-axis calibrated for uphill, downhill, or uneven terrain. Adjustable sensitivity from 0.2°–1.0°.

✅ Customizable Modes
Choose from 3-LED, blinking, or single-LED indicators. Adjustable brightness. Auto sleep. Auto power-off (1–5hr or disable).

📦 What’s Included:

• SEND iT Gen2 (Picatinny or V-Mount)

• Ocular Mounting Kit (fiber optic line)

• CR2032 Battery (pre-installed)

• Custom T10-T6 Wrench

• Grip Tape (x3)

📐 Specifications:

The post Send IT Gen2 Level – Direct Centre Picatinny Mount appeared first on Delta Tactical.