The MDT Metal 300 WinMag magazine is built for performance and reliability in the most demanding environments. This magazine is constructed from high-strength steel and finished with Cerakote Elite for unmatched durability and corrosion resistance.

Perfect for long action setups, this magazine is compatible with AICS-pattern bottom metals and chassis systems that accept Standard magazines. With a 5-round capacity optimized for magnum cartridges like the 300 win mag, it delivers smooth feeding and rock-solid performance.

Key Features:

• Precision-engineered for 300 WIN MAG and other magnum cartridges

• Standard 3.715″ OAL – long action magazine

• High-strength steel construction for durability and longevity

• Cerakote Elite finish for superior corrosion resistance

• 5-round capacity

• Compatible with AICS-pattern DBM chassis and bottom metals

⚠️ Important Fitment Notes:

• Standard MDT long action magazines are 3.715″ unless specified as CIP/3.850″

• Remington Tactical Chassis and 338 Lapua XCR rifles use 3.775″ magazines (not supported by MDT)

• Tikka T3/T3x and Savage Axis long actions require the 3.560″ magazine option

• Not compatible with 300 Remington Ultra Mag, 300 Weatherby, and similar oversized cartridges

Compatibility:

• Optimized for 300 WIN MAG

• Fits chassis systems and DBMs built to accept Standard length 3.715″ AICS magazines

Order now to upgrade your long-range setup with MDT’s rugged and reliable steel magazine – built to feed when it matters most.

The post 300WM Magazine – 5RND appeared first on Delta Tactical.

The post 300WM MDT CIP LA Polymer Magazine – 3 RND appeared first on Delta Tactical.

• 10-Round Magazines for 308:
• 3.055” Outside Length
• 2.870” max cartridge overall length (COAL) with binder plate

MDT AICS-pattern metal magazines are manufactured from high strength steel, nitride-finished and coated with Cerakote Elite for ultimate durability and performance.

The short action magazines are offered for .308 Win and 6.5 Creedmoor family cartridges.

The 6mm BR magazine is offered for the 6mm BR and family of cartridges, and are available in 12 round capacity.

These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard.

Details

MDT AICS-pattern metal magazines are manufactured from high strength steel, nitrided, and finished inside and outside with Cerakote Elite for ultimate durability, corrosion resistance, and friction reduction.

Binder Plate Details

The magazines without front binder plates allow a maximum cartridge overall length of 2.960”. These are compatible with all AICS-pattern bottom metal and chassis systems, but most common actions such as Remington 700 and Savage 10/11 will require modifications to the receiver (i.e. notching out the bottom of the feed ramp) to prevent the bullet tips from catching on the bottom of the feed ramp (see photo below). DO NOT order these magazines without a full understanding of this.

The post 308WIN Magazine – 10RND appeared first on Delta Tactical.

Our single-stack, single-feed long action magazines for the .308 Winchester are the perfect magazines for any shooter looking to feed several short action calibers in their long action rifle. These long action .308 WIN magazines from Accurate-Mag are built from steel, heat treated, and then coated with a special Teflon coating for a smooth finish.

The post 308WIN Long Action Magazine – 5RND appeared first on Delta Tactical.

Single stack single feed magazine for the .30-06 Springfield is the perfect magazine for bridging the world between hunting and tactical shooting.

The .30-06 SPRG magazine from Accurate-Mag is built from steel and heat treated with a Black Nitride finish for enhanced wear resistance and corrosion resistance.

This Magazine is 3.715″ in length meaning it will fit right inot a Long Action Remington Length DBM (Non-CIP) including Badger, Seekins, CDI, Atlasworx, Surgeon Etc…

The post 30-06 Magazine 3RND appeared first on Delta Tactical.

3.850″ CIP

Single stack single feed magazine for the .30-06 Springfield is the perfect magazine for bridging the world between hunting and tactical shooting.

The .30-06 SPRG magazine from Accurate-Mag is built from steel and heat treated with a Black Nitride finish for enhanced wear resistance and corrosion resistance.

This Magazine is 3.850″ in length meaning it will fit right int0 a Long Action Remington Length DBM (CIP) including Badger, Seekins, CDI, Atlasworx, Surgeon Etc…

The post 30-06 Magazine – 3RND 3.850 CIP appeared first on Delta Tactical.

The .300 RUM/.375 H&H magazine from Accurate-Mag is built from steel, heat treated and coated with a teflon finish for enhanced wear resistance and corrosion resistance.

Accurate-Mag Products Precision center fire rifle cartridge magazines are based on current service configuration meeting all Mil-Spec and NATO Stanag requirements. Magazines fit all M24 & M40 type service rifles as well as MK13 and NATO Variants. AM Products is the proprietary manufacturer of magazines for the recently fielded M2010 sniper system.

Hardened Military quality is used commercially in Colt, Savage, Ruger and Remington precision bolt action rifles; as the OEM choice.

Diverse offering of caliber selection, cartridge length options and capacity; is the largest precision center fire rifle magazine selection in the world.

AM Products constant attention to quality, reliability, material and process selection creates a repetitive and time tested product; for a lifetime of reliability.

The post 300RUM Magazine – 3 Round appeared first on Delta Tactical.

The .300 RUM/.375 H&H magazine from Accurate-Mag is built from steel, heat treated and coated with a teflon finish for enhanced wear resistance and corrosion resistance.

Accurate-Mag Products Precision center fire rifle cartridge magazines are based on current service configuration meeting all Mil-Spec and NATO Stanag requirements. Magazines fit all M24 & M40 type service rifles as well as MK13 and NATO Variants. AM Products is the proprietary manufacturer of magazines for the recently fielded M2010 sniper system.

Hardened Military quality is used commercially in Colt, Savage, Ruger and Remington precision bolt action rifles; as the OEM choice.

Diverse offering of caliber selection, cartridge length options and capacity; is the largest precision center fire rifle magazine selection in the world.

AM Products constant attention to quality, reliability, material and process selection creates a repetitive and time tested product; for a lifetime of reliability.

The post 300RUM Magazine – 5 Round appeared first on Delta Tactical.

3.850″ CIP

Single stack single feed magazine for the .30-06 Springfield is the perfect magazine for bridging the world between hunting and tactical shooting.

The .30-06 SPRG magazine from Accurate-Mag is built from steel and heat treated with a Black Nitride finish for enhanced wear resistance and corrosion resistance.

This Magazine is 3.715″ in length meaning it will fit right inot a Long Action Remington Length DBM (Non-CIP) including Badger, Seekins, CDI, Atlasworx, Surgeon Etc…

The post 30-06 Magazine 3.850 CIP appeared first on Delta Tactical.

• 10-Round Magazines for 6mm:
• 3.055” Outside Length
• 2.570” max cartridge overall length (COAL) with binder plate and spacer
• 4.61” Rear Height
• (NSW/ACT Compliant)

MDT AICS-pattern metal magazines are manufactured from high strength steel, nitride-finished and coated with Cerakote Elite for ultimate durability and performance.

The short action magazines are offered for .308 Win and 6.5 Creedmoor family cartridges.

The 6mm BR magazine is offered for the 6mm BR and family of cartridges, and are available in 12 round capacity.

These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard.

6MM Caliber Mag

From testing, we have established that these magazines will work with the following calibers:

• 6mm BR Norma
• 6mm BRA
• 6mm BRX
• 6 mm Dasher
• 22 BR

Additionally, through testing, we have found that these magazines ARE NOT COMPATIBLE WITH the following actions:

• Curtis Custom’s Axiom and Vector
• GAP Tempest
• Ultimatum Deadline
• and most other commonly available, aftermarket 3-lug actions

Details

MDT AICS-pattern metal magazines are manufactured from high strength steel, nitrided, and finished inside and outside with Cerakote Elite for ultimate durability, corrosion resistance, and friction reduction.

Binder Plate Details

The magazines without front binder plates allow a maximum cartridge overall length of 2.960”. These are compatible with all AICS-pattern bottom metal and chassis systems, but most common actions such as Remington 700 and Savage 10/11 will require modifications to the receiver (i.e. notching out the bottom of the feed ramp) to prevent the bullet tips from catching on the bottom of the feed ramp (see photo below). DO NOT order these magazines without a full understanding of this.

The post 6mm Magazine – 10RND appeared first on Delta Tactical.