Comes with 8 stations of 7/8-14″ thread for the Standard Dies.

The post ZERO Reloading Press Spare Turret G2 – Standard Dies (7/8-14) appeared first on Delta Tactical.

The Area 419 ZERO Die Ring Multi-Pack – 1-1/4″ delivers enhanced precision and consistency for your reloading setup. Designed to solve a common challenge in reloading presses — inconsistent lock ring performance — these rings provide superior contact and engagement to square dies perfectly with the press head.

Most conventional die lock rings use set screws or split-clamp designs that can shift or misalign under load. Area 419 re-engineered the concept, creating a large-diameter locking ring with internal wrench engagement, improving alignment and retention whether you’re using a single-stage or turret press.

Each 1-1/4″ Multi-Pack contains four rings sized 1-1/4×12 and a bespoke wrench, finished in durable black nitride with a lightweight aluminium hardcoat-anodised wrench. These rings feature more thread engagement than many competitive designs, helping ensure your dies remain square, secure and repeatable throughout your reloading process.

This kit is essential for reloaders who demand durability, precision and ease of use — especially when working with larger die sizes or progressive presses that require quick, confident die changes without sacrificing alignment.

🔹 Key Features

• Complete 1-1/4″ Multi-Pack with 4 locking rings and specialised wrench

• Large diameter and .350″ thread engagement for superior die alignment and stability

• Internal wrench engagement for easy tightening, even in tight press environments

• Precision machined from 17-4PH stainless steel for durability and corrosion resistance

• Black nitride finish with anodised wrench for lasting performance

• Designed for use with reloading presses that accept 1-1/4×12 rings

🔹 Specifications

The post ZERO Die Ring Multi-Pack – 1-1/4″ (4 Rings + Wrench) appeared first on Delta Tactical.

7/8″ Multi-Pack includes (9) rings, all 7/8×14, and a wrench.

The post ZERO Die Ring Multi-9 Pack – 7/8×14 appeared first on Delta Tactical.

Every one of your Area 419 ZERO sizing dies comes equipped with a precision-turned decapping pin made from high-quality 17-4 PH stainless steel.

Even with the best materials, things happen — maybe you bend one, break one or just want spares for the bench. That’s where the ZERO Die Replacement Decapping Pins step in.
Choose either a single pin or go for the value 3-pack to keep your reloading workflow uninterrupted.

These pins are built with the same attention to detail and machining standards as the rest of the ZERO system. Whether you’re sizing for competition, match ammo or custom loads, you’ll appreciate the consistency, fit and finish.

“A product that you will need at some time.” — Customer review.

Keep your reloading kit ready — spares prevent downtime. The Area 419 ZERO Decapping Pins aren’t just a backup, they’re a smart addition to your reloading bench.

📋 Specifications / Features Table

The post ZERO Die Replacement Decapping Pins appeared first on Delta Tactical.

Upgrade your reloading flexibility with the ZERO M-Series Die Sleeve & Mandrel Kit from Area 419. Engineered for reloaders who already own an M-Series ZERO die, this kit lets you swap calibers or adjust neck tension without having to buy a full new die. It’s the modular solution that maximises your investment and boosts your reloading workflow.

What’s Included & Why It Matters:

• One Sizing Sleeve in your selected caliber—identical to the internal sleeve that comes in the complete M-Series die.

• One Mandrel, providing approximately 0.002″ neck tension in usage, matching the standard mandrel in M-Series dies.

• One Extra Decapping Pin included as a spare—ensuring continued operation without interruptions.

This kit allows you to expand or adjust your existing ZERO M-Series die setup. Rather than having to purchase an entire new die for a different caliber, you can simply insert a new sleeve and mandrel quickly—and get precision sizing immediately.

Important Notes:

• This is only for users who already have a ZERO M-Series die. It is not usable on non-M-Series or standard dies.

• Because the kit lacks the external die body itself, you must maintain your existing die housing.

• The modularity gives you faster changes between calibers and more flexibility for fine tuning your neck tension.

Whether you’re experimenting with a new cartridge or fine-tuning your load development, the ZERO M-Series Sleeve & Mandrel Kit gives you the modular adaptability and precision you need — without redundant die purchases.

📋 Specifications / Feature Summary Table

The post ZERO M-Series Die Sleeve and Mandrel Kits appeared first on Delta Tactical.

Upgrade your ZERO reloading press with a precision tool designed to elevate your bullet seating consistency. The Bullet Seating Plate for The ZERO from Area 419 offers a perfectly flat stainless steel surface to push your cases — eliminating any possible die interference that can induce runout or misalignment.

Why Use This Seating Plate?

• No Die Contact — Unlike traditional shellholders with rims or ledges, this plate has no extraction rim, ensuring the die only interacts with the case shoulder or taper. This minimizes mechanical contact points that can introduce error.

• Maximum Contact Surface — More surface area than typical shellholders means better stability during seating.

• Guaranteed Flatness — Precision-ground stainless steel construction ensures it remains flat and stable under load.

• Only for The ZERO — This plate is purpose-built for the Area 419 ZERO Reloading Press. It will NOT function with other presses — order accordingly.

• Manual Removal May Be Required — Because there’s no extraction rim, cases may need to be removed by hand after seating. Some drop freely by gravity depending on configuration; others must be pulled.

Add this seating plate to your reloading setup and realize improvements in consistency, alignment, and the precision of your handloads when using The ZERO.

The post Bullet Seating Plate for The ZERO appeared first on Delta Tactical.

Whether you’re a competitive shooter, long-range hunter, or tactical marksman, the ZERO S-Series Die is designed to provide consistent case sizing, smoother bolt operation, and extended brass life.

🔧 Built for Precision. Priced for Performance.

Key Features:

• Precision Ground Expander Mandrel: Includes a .002″ neck tension mandrel for perfect bullet grip and accuracy. Compatible with the full Mandrel Kit (sold separately).

• Full-Length Neck to Extractor Sizing: Ensures every case cycles smoothly and reliably.

• Spring-Loaded Spent Primer Ejection: Say goodbye to stuck primers and messy cleanups.

• Replaceable Steel Decapping Pins: Rugged, user-replaceable components keep you in the game.

• Reamer-Cut Sizing Chamber: True-to-spec sizing with no more sticky bolts after a few firings.

• Hydraulic Shoulder Pressure Relief: Reduces shoulder stress and extends case life.

• Includes: Area 419 ZERO Universal Die Ring, spare decap pin, install/removal tools.

Shellholder Compatibility:

This listing is for the die only. Shellholder not included. Compatible with standard shellholders from:

• Redding

• RCBS

• Hornady

• Lyman

• ZERO Modular Shellholder System

Made in the USA

Precision manufactured using premium materials and the highest quality control standards.

Why Reloaders Choose the ZERO S-Series Die:

✔ Engineered for elite performance
✔ Seamless integration into most reloading setups
✔ Unmatched value and build quality
✔ Proven results by top-tier shooters

Customer Reviews:

⭐️⭐️⭐️⭐️⭐️
“Flawless results out of the box. Neck tension is spot-on and my bolt has never felt smoother.” – Mark T.

Boost Your Reloading Bench Today

🛒 Order now and take your precision to the next level with the ZERO S-Series Sizing Die from Area 419.

The post ZERO S-Series Sizing Die – 7/8″ Precision Reloading Die appeared first on Delta Tactical.

2 x 7/8″ Rings & 2 x 1-1/4″ Rings & 1 x Wrench

The post ZERO Die Ring Multi-Pack – Hybrid appeared first on Delta Tactical.

Primer drawback sucks. It’s frustrating, and can cause all sorts of process inconveniences. So, let’s get them the heck out of the way.

The Area 419 ZERO Universal Decapper (Universal because it’ll work with any common press, or any common cartridge) has a spring loaded decapping pin, with replaceable heads, so you can send primers straight to hell the trash bin with no headaches, no drawback, and a satisfying “ping”.

The body of the die is aluminum, with all of the moving parts being of steel construction.

This die will work with cases up to and including 338 Lapua length/diameter with no need for different inserts, and is compatible with any common press or shellholder.

The post ZERO Spring-Loaded Decapping Die appeared first on Delta Tactical.

Really though, that’s not us. We like to use different components, we like to compare, and we want to know that the measurements we are taking are a little more than relative. This is why we are making our ZERO measurement gauges.

GENERAL CONSTRUCTION

To make these measurement gauges, they all needed to be the same. Exactly the same. And they had to stay that way. All of these parts are made on our world-class DMG Mori lathes, from American steel, cut with reamers for consistency, and then nitrided to help them last a lifetime.

HEADSPACE GAUGES

Headspace gauges don’t need the be complicated, they just need to be correct, and exceedingly consistent. This led us to a traditional datum-style gauge – as we believe it provides the most true measurement – cut with a reamer to keep our diameter, face, and radius as consistent as possible. Again, this is in an effort to allow you to compare your measurements with someone from North Dakota or Nevada or the Netherlands, knowing that the numbers on your caliper mean something.

Included Sizes: .330, .350, .375, .400, .420, Rimfire

The post ZERO Headspace and Ogive Measurement Gauge Kit appeared first on Delta Tactical.