• Designed for most 34 mm LPVO scopes, this model mounts your optic and transforms it into an advanced fire control system.

• On-board sensors (temperature, pressure, humidity, pitch, roll, heading) feed into the integrated Applied Ballistics® solver to compute a precision compensated aiming point overlay.

• Daylight-readable green symbology display is user-customisable and overlays your scope reticle, but if power fails your original reticle remains zeroed and usable.

• Built tough: machined from 7075-T6 billet aluminium with Type III hard-anodised finish, waterproof up to 3 ft (91 cm) for 30 minutes, and rated for –40 °F to +140 °F (–40 °C to +60 °C) depending on battery.

• Weight & footprint: 22.6 oz (≈642 g) with batteries; dimensions approx 8.2″ × 2.3″ × 3.0″ (209 × 59 × 77 mm) for this model jacket-size.

• Connectivity & extras: Bluetooth® Low Energy, Near-Field Communication (NFC) and Ultra-Wideband (UWB) modules (each can be disabled) for smartphone companion-app setup and accessory integration.

• Compatibility: Works with standard Picatinny/STANAG 4694 rails and supports most 34 mm LPVOs (both first- and second-focal-plane) according to the compatibility guide.

Whether you’re upgrading a competition rifle, tactical platform, or serious long-range setup, the X4-FCS 34 mm brings next-level fire-control capability while leveraging your existing optic.

Features / Specifications Table

The post Maztech X4-FCS 34 mm – Fire-Control System Mount for 34 mm LPVO appeared first on Delta Tactical.

Engineered for Precision. Built for Reliability. Designed Without Compromise.

When only the best will do, the [Brand Name] Final-Bored Precision Scope Mount delivers an unparalleled fusion of military-grade strength, lightweight design, and obsessive machining precision. Born from the desire to create the most reliable and consistent scope mount on the market, this mount is built for shooters who demand perfection—every time.

Why This Mount Is in a League of Its Own:

✅ Final-Bored as a Matched Set
Each mount is CNC-milled, anodized, fully assembled, torqued to spec, and final-bored in-house as a complete unit. The result? Ring-to-optic contact that’s precise, true, and grip-secure—eliminating shift, stress, or alignment issues found in generic mass-assembled mounts.

✅ Raw Aluminum Internals
The scope contact surfaces are left raw and precision bored, creating an ideal surface for maximum grip and zero optic slippage.

✅ American 7075-T6 Aluminum Construction
CNC-milled in the USA using aerospace-grade 7075 aluminum, delivering 8–9oz of rugged, lightweight strength.

✅ Advanced Mounting Flexibility

• Separate clamping bars for better rail engagement

• Inset mounting feet for optimal picatinny slot alignment

• Multiple accessory ports – perfect for lasers, illuminators, or our Tactical Diving Board™ accessory (patent pending)

✅ Premium Hardware
Fitted with custom nitrided stainless fasteners and steel alignment pins between the cap and base for unmatched structural integrity and repeatability.

Is it Overkill? Maybe. But It’s Done Right.

While most mounts skip the critical final step of post-anodize boring, we double down—eliminating tolerance stack-up and ensuring each unit performs like a custom-machined set. That’s what true consistency requires—and we think that’s worth doing.

📦 Package Includes:

• One [Brand Name] Final-Bored Precision Scope Mount (select model)

• All required stainless mounting hardware

• Torx driver and setup instructions

Perfect For:

• Long-range precision shooters

• Tactical professionals

• Competition marksmen

• Hunters who can’t afford optic failure

The post Cantilevered Tactical One-Piece Scope Mount 34MM appeared first on Delta Tactical.

Available in both four-screw and six-screw versions.  Crafted of machined 7075-T6 hard anodized aluminum, with titanium crossbolts and jaws, they give you the performance of steel at half the weight.  This unique construction provides strength well beyond that normally found in lightweight rings.

The four-screw ring will provide a lifetime of service for most applications.  If you think you need 50% more clamping force, the six-screw Ultralite rings will hold your riflescope under any conceivable situation.  Our Ultralite™ rings are offered in six heights for 30mm tubes and four heights to fit 34mm tubes.

The post X-Treme Duty 6 Screw Ultralite Rings Dark Earth – 34mm (M) appeared first on Delta Tactical.

To do this was no small manufacturing task. This led us down a rabbit-hole, ultimately arriving on a process that gets you final-bore matched rings, with raw aluminum internals, for a grip on your optic that is more reliable and more true than anything else made.

Like most rings, these begin as separate parts. We are making the bases and caps in batches. While many will make these parts, send them to anodize, and then just assemble, we produce around the extra steps. Once these parts return from anodize, they are fully assembled, placed back into specially produced rail fixtures, with the caps torqued to spec over specially made spacers (to give the rings space to torque down on the optic), and final-bored as sets in our world-class machining centers. Rings are then brought off the machine in sets, and packaged together so you know that your rings were made for one another, and you can rely on them for decades.

Is it overkill? Probably. But we think it’s the right way. So that’s what we are going to do.

NOTE: TO KEEP THE SIZE AND WEIGHT OF THESE RINGS TO A MINIMUM, THERE ARE NO ACCESSORY ATTACHMENT POINTS ON THESE RINGS. IF YOU WANT TO BE ABLE TO ADD ACCESSORIES TO YOUR RINGS, PLEASE CHECK OUT OUR MATCH OR TACTICAL OFFERINGS.

SPECS

• Material: 7075 Aerospace Grade Billet Aluminum (with Stainless Steel Hardware)
• Coating: Type 3 Hardcoat Anodize (internal bore is raw aluminum)
• Weight: 4 oz/set (30mm Medium)

HOW TO INSTALL
NOTE: Before the installation, ensure that the picatinny rail, scope tube and scope ring bore are clean and free from any debris or foreign material to prevent any potential damage to your scope or action during installation. Your required tool is a T20 Torx bit, 45 in/lb torque limiter, and an 18 in/lb torque limiter.

1. Remove the ring cap from the ring base and loosely install the scope rings onto your scope tube where the rings will freely rotate on the scope. It is imperative to keep the matching cap to the matching scope ring base in the correct orientation throughout the installation of the rings. It is not imperative that the clamp bars are on the left or right side as long as both rings are facing the same direction.
2. Loosen the clamp bars and place the scope and scope ring assembly onto the rifle action in the proper location for correct eye relief. A light coat of oil on the mounting surfaces of the picatinny sections is recommended but not required.
3. With the scope loosely mounted into the rings and onto the rifle, torque the scope ring cap screws down onto the optic in cross-hatch pattern using the T20 Torx wrench. Initially tighten the bolt until the head of the bolt just makes contact with the cap. Once all eight bolts are tightened in a cross-hatch pattern repeat the process, incrementally increasing torque until you achieve 18 in/lbs of torque on each bolt. Ensure that there is an even gap between the cap and the base on each side of the rings.
4. Push the rings forward into the picatinny section to ensure contact between the clamp bar bolts and the picatinny lug section to eliminate slip from recoil.
5. Tighten the clamp bar bolts, alternating between each bolt as you incrementally increase torque until 45 in/lbs is achieved.
6. Loosen cap screws, level your scope to your action then torque the cap screws back down following the procedure from step 3.

The post HUNT Scope Rings – 34mm appeared first on Delta Tactical.

Like most mounts, these begin as separate parts. We are making the bases and caps in batches. While many will make these parts, send them to anodize, and then just assemble, we produce around the extra steps. Once these parts return from anodize, they are fully assembled, placed back into specially produced rail fixtures, with the caps torqued to spec over specially made spacers (to give the rings space to torque down on the optic), and final-bored as sets in our world-class machining centers. Mounts are then brought off the machine in sets, QC’d and packaged, ensuring that you receive a mount that was finished perfectly.

Is it overkill? Probably. But we think it’s the right way. So that’s what we are going to do.

KEY FEATURES

• CNC Milled in America from American 7075 Aluminum
• Raw aluminum, precision bored scope contact surfaces for maximum grip
• Final-bored in sets, and never fully disassembled after boring
• Multiple accessory mounting points
• Separate rail clamping bars for maximum grab on the pic rail
• Inset clamping feet, allowing for maximum mounting adjustment and pic rail utility
• Steel guide pins between base and caps, aiding in alignment
• Custom nitrided stainless hardware
• Patent-Pending ultra-rigid and repeatable top accessory attachment

The post Tactical One-Piece Scope Mount 34mm appeared first on Delta Tactical.

Like most rings, these begin as separate parts. We are making the bases and caps in batches. While many will make these parts, send them to anodize, and then just assemble, we produce around the extra steps. Once these parts return from anodize, they are fully assembled, placed back into specially produced rail fixtures, with the caps torqued to spec over specially made spacers (to give the rings space to torque down on the optic), and final-bored as sets in our world-class machining centers. Rings are then brought off the machine in sets, and placed into the laser to mark them as sets, with each set being uniquely identified as a match to its precision-bored counterparts.

Is it overkill? Probably. But we think it’s the right way. So that’s what we are going to do.

The post MATCH Scope Rings – 34mm appeared first on Delta Tactical.

Extra High Height (35mm)

Tier One Scope Rings are precision made on 5 axis CNC machinery. The key to accuracy in manufacture is to minimise the number of operations required to complete the machining process.

By investing in new Technology, we have been able to cut the number of operations required from eight to two.

By doing this, there is no accuracy loss due to re setting for different operations.

All Rings are made from Aluminum 7075T6 and are available in medium and high configurations.

The post Picatinny Rings – 34mm Extra High Height (35mm) appeared first on Delta Tactical.

High Height (30mm)

Tier One Scope Rings are precision made on 5 axis CNC machinery. The key to accuracy in manufacture is to minimise the number of operations required to complete the machining process.

By investing in new Technology, we have been able to cut the number of operations required from eight to two.

By doing this, there is no accuracy loss due to re setting for different operations.

All Rings are made from Aluminum 7075T6 and are available in medium and high configurations.

The post Picatinny Rings – 34mm High Height (30mm) appeared first on Delta Tactical.

Arken’s Rigid Precision Mount is a one-piece cantilever scope mount, CNC machined from aircraft-grade 6061-T6 aluminium for a stiff, single-unit platform that holds zero under recoil. The cantilever design pushes the scope forward roughly 2.5in ahead of the rail, giving AR-platform rifles the extra eye relief they need without a separate ring-and-base setup to align. Available with 0 MOA or 20 MOA of built-in elevation, depending on how far out you’re shooting.

Key features

• One-piece cantilever design: Rings and base machined as a single unit — no alignment to fuss with between separate rings and a base.
• Aircraft-grade 6061-T6 aluminium: Fully CNC machined for a stiff, precise fit that holds zero under heavy recoil.
• ~2.5in forward extension: Pushes the scope forward for correct eye relief on AR-platform rifles.
• MIL-STD Picatinny fit: Fits standard Picatinny rails.
• Matte black anodised finish: Durable and corrosion-resistant.

Choose your MOA offset

Both options below are the 34mm tube diameter. Pick whichever suits your typical shooting distance:

• 0 MOA — no built-in elevation, for general-purpose and closer-range use where you don’t need extra elevation dialled in before you start.
• 20 MOA — 20 MOA of built-in elevation, freeing up more of your scope’s internal adjustment range for longer-range shooting.

Full specifications

Who it’s for

The Rigid Precision Mount suits AR-platform shooters who want a single-piece mount rather than separate rings and a base to align — one less source of movement or misalignment under recoil. 0 MOA covers general-purpose and closer-range use; 20 MOA is worth choosing if you’re shooting far enough out that you’d otherwise run out of elevation adjustment in the scope itself.

Warranty

Backed by Arken’s lifetime warranty: Australian purchases are covered under the same global policy — if it fails to perform as advertised, it will be repaired or replaced.

The post Arken Rigid Precision Mount – 34mm appeared first on Delta Tactical.

Arken’s HALO Ti scope rings are CNC machined from a fusion of aerospace-grade 7075 T6 aluminium and titanium, built as matched pairs for a precise, repeatable fit on MIL-STD Picatinny rails. Reinforced recoil lugs and Torx-style socket screws hold zero under heavy recoil, in a mount that’s noticeably lighter than a standard steel ring set. Available in three heights to suit your scope’s objective bell and mount clearance.

Key features

• Aluminium-titanium construction: CNC machined from a fusion of 7075 T6 aluminium and titanium — strong and noticeably lighter than steel rings.
• Matched pairs: Each set is CNC machined together for consistent alignment and clamping pressure ring to ring.
• Reinforced recoil lugs: Keep the rings locked to the rail under heavy recoil, so zero holds.
• Torx-style socket screws: Included, for a secure, consistent mounting torque.
• MIL-STD Picatinny fit: Fits standard Picatinny rails.
• Matte black, Type III hard-coat anodised finish: Durable and low-glare.

Choose your ring height

All three heights below are the 34mm tube diameter. Pick whichever gives your scope the clearance it needs over the rail, action or barrel:

• 0.92in (Low) — the lowest mounting height, for a close cheek weld where your scope’s objective bell clears the barrel.
• 1.26in (Medium) — extra clearance for a larger objective bell or a scope mounted over other rail-mounted gear.
• 1.45in (High) — the most clearance, for larger objective bells or mounting over bipods, iron sights or other low-profile gear on the rail.

Full specifications

Who it’s for

The HALO Ti rings suit anyone mounting a 34mm-tube scope who wants a lighter, precision-machined alternative to a standard steel ring set — useful on a hunting rifle where every ounce counts, or on a precision rig where consistent, repeatable clamping matters. The three height options let you match ring height to your scope’s objective bell and your preferred cheek weld.

Warranty

Backed by Arken’s lifetime warranty: Australian purchases are covered under the same global policy — if it fails to perform as advertised, it will be repaired or replaced.

The post Arken HALO Ti scope rings – 34mm appeared first on Delta Tactical.