Arken HALO Ti™ Titanium Scope Rings — 34mm

Arken’s HALO Ti scope rings are CNC machined from a fusion of aerospace-grade 7075 T6 aluminium and titanium, built as matched pairs for a precise, repeatable fit on MIL-STD Picatinny rails. Reinforced recoil lugs and Torx-style socket screws hold zero under heavy recoil, in a mount that’s noticeably lighter than a standard steel ring set. Available in three heights to suit your scope’s objective bell and mount clearance.

Key features

• Aluminium-titanium construction: CNC machined from a fusion of 7075 T6 aluminium and titanium — strong and noticeably lighter than steel rings.
• Matched pairs: Each set is CNC machined together for consistent alignment and clamping pressure ring to ring.
• Reinforced recoil lugs: Keep the rings locked to the rail under heavy recoil, so zero holds.
• Torx-style socket screws: Included, for a secure, consistent mounting torque.
• MIL-STD Picatinny fit: Fits standard Picatinny rails.
• Matte black, Type III hard-coat anodised finish: Durable and low-glare.

Choose your ring height

All three heights below are the 34mm tube diameter. Pick whichever gives your scope the clearance it needs over the rail, action or barrel:

• 0.92in (Low) — the lowest mounting height, for a close cheek weld where your scope’s objective bell clears the barrel.
• 1.26in (Medium) — extra clearance for a larger objective bell or a scope mounted over other rail-mounted gear.
• 1.45in (High) — the most clearance, for larger objective bells or mounting over bipods, iron sights or other low-profile gear on the rail.

Full specifications

Tube diameter	34mm
Heights available	0.92in (Low), 1.26in (Medium), 1.45in (High)
Material	Aerospace-grade 7075 T6 aluminium fused with titanium
Finish	Matte black, Type III hard-coat anodised
Rail compatibility	MIL-STD Picatinny rails
Ring screw torque	Maximum 18 in/lb (follow your optic manufacturer’s spec if it’s lower)
Base screw torque	Maximum 30 in/lb
Weight — 0.92in (Low)	4.3 oz per pair
Weight — 1.26in (Medium)	5.4 oz per pair
Weight — 1.45in (High)	6.1 oz per pair
In the box	Ring pair, mounting screws, Torx wrench

Who it’s for

The HALO Ti rings suit anyone mounting a 34mm-tube scope who wants a lighter, precision-machined alternative to a standard steel ring set — useful on a hunting rifle where every ounce counts, or on a precision rig where consistent, repeatable clamping matters. The three height options let you match ring height to your scope’s objective bell and your preferred cheek weld.

Warranty

Backed by Arken’s lifetime warranty: Australian purchases are covered under the same global policy — if it fails to perform as advertised, it will be repaired or replaced.