Masterpiece Arms builds world class rifles. Starting with their industry-leading chassis system, the best actions and triggers produced, and MPA/Spencer 416R hand-lapped barrels, the Vanquish PMR Rifle is designed, built and enhanced by long-range shooters and hunters to fulfil the needs of the most discerning shooters.

This Build

• Calibre: 6.5 Creedmoor
• Action: Short Action, Right Hand
• Action & Barrel Finish: Black
• Barrel: 26″, MPA Match contour
• Trigger: MPA-branded trigger made by Bix’n Andy (Tac Sport Pro-X Single Stage)
• Chassis: MPA Vanquish Chassis – Tungsten
• Buttstock: Standard
• 2 Nesting Bridge sections, with tape

Action

• MPA Short Action (ARC MPA Elite)
• Wire EDM bolt lug raceways
• Integral lug and scope base
• Adjustable trigger hanger
• 3-lug head
• Integral 20 MOA scope rail
• Quick-release firing pin assembly removal system (tool-less)
• Three-piece bolt design (bolt, lugs and handle)
• Spiral fluting
• Black nitride coating
• Mechanical extractor

Barrel

• 416R stainless steel
• Precision gun drilled, reamed and honed
• Pull button rifled
• Stress relieved
• Hand lapped
• Bore and land inspected on video borescope
• Sheffield air gauge inspection to .0001″ on bore and rifling land variation
• Chamber indicated within .0001″ or less to the bore of the rifle
• Muzzle thread 5/8×24

Chassis System

• MPA Vanquish Chassis
• Masterpiece Arms Matrix Pro II buttstock with drop-down bag rider
• Magwell plate system ready
• Produced from 6061 aluminium
• V-bedding system with additional clearance for glass bedding the action and straight section of barrel
• MPA Matrix with adjustable cheek riser and length of pull
• Built-in bag rider with butthook
• 2 nesting bridge sections
• Steel spigot mount (Picatinny rail and ARCA Swiss rail)
• Cerakote finish – multiple colours available
• Built-in inclinometer levelling system
• Matrix EVG grip (alternate grips additional)
• Thumb notch
• R.A.T. System compatible

Thread Protector

MPA muzzle thread protector included.

Accuracy

1/2 MOA or better.

Rifle Case

Plano basic rifle case included.

Specifications

• Total rifle weight: 16.5 lbs with 26″ MPA Match barrel (excludes ammo, bipod, magazine, optic)
• Barrel: 416R stainless steel, hand-lapped
• Action: MPA Elite (ARC)
• Chamber: zero-runout chambering method
• Muzzle threads: 5/8×24
• Brake: not included
• Chassis type: Vanquish
• Chassis colours: Black or Tungsten
• Chassis material: 6061 aluminium billet
• Chassis coating: H-Series Cerakote
• Magazine: Accurate Mag 10-round (308)
• Chassis weight: 7.12 lbs (standard buttstock)
• Barrel profile: MPA Match contour
• Barrel length: 26″
• Adjustable length of pull: 12″ to 13.5″
• Cheek riser: adjustable
• Recoil plate: adjustable for height and cant

The post MPA Vanquish PMR Rifle — 6.5 Creedmoor appeared first on Delta Tactical.

The Masterpiece Arms Rimfire Elite Barreled Action stands as a pinnacle of reliability, performance, and accuracy, utilised by elite shooters globally. Backed by unparalleled customer support and a dedicated support team, it comes with enhanced engineering and performance documentation to maximise shooters’ potential in all rimfire competitive environments.

This Build

• Barrel Contour: MPA Match
• Barrel Thread: Crowned – No Thread
• Barrel Tuner: No
• Barrel Length: 24″
• Twist Rate: 1:16
• Trigger: TriggerTech Diamond
• Handedness: Right Handed

Barrel

Barrels are made from 416 stainless steel, hand-lapped and hand-chambered. Each chamber is machined to run both Eley and Lapua length rim thickness, allowing consistent ignition across precision-oriented rimfire ammunition. Crush on the projectile is optimised by engaging the second drive band on the bullet across multiple bullet types, enhancing accuracy performance.

Receiver

• Remington 700 footprint
• Integral recoil lug
• 30 MOA Picatinny rail
• 1 1/16-16 UN-2A barrel thread
• AICS Rimfire mag compatible
• 60-degree bolt throw
• Adjustable trigger hanger
• Robust, 11 o’clock bolt release
• Black nitride finish
• Fixed ejector

Bolt

• 2-lug design
• Reliable, proven pad-and-hook extractor design
• Controlled-round-feed extractor with ability to push/single feed
• Standard 5/16-24 UNF 2A bolt knob thread
• Black nitride finish

Chamber

• Reamer lead angle: 1.5 degree
• Crush optimised by engaging the 2nd drive band on the bullet across multiple bullet types
• Rim thickness range: .037″–.043″

The post MPA Rimfire Elite Barreled Action – 24″ MPA Match, 1:16 Twist, TriggerTech Diamond (RH) appeared first on Delta Tactical.

The Next Evolution of Competition Chassis Design

The Vanquish Chassis was developed from years of PRS and NRL competition experience, incorporating extensive feedback from top-level shooters.

MPA redesigned the chassis from the ground up to improve:

• Positional stability
• Weight distribution
• Balance tuning
• Shooter ergonomics
• Barricade performance
• Accessory integration

The result is one of the most refined competition chassis systems available today.

Your Selected Configuration

Colour

Black Cerakote

A premium Cerakote finish that delivers exceptional durability while offering a clean, professional appearance suitable for competition, hunting and tactical applications.

Action Inlet

Remington Short Action (and Clones)

Compatible with a huge range of premium actions including:

• Impact 737R
• Zermatt Origin
• Zermatt TL3
• Defiance Deviant
• Lone Peak Fuzion
• Terminus Zeus
• Surgeon
• Kelbly Atlas Tactical

and most Remington 700 short-action footprint clones.

Orientation

Right Hand

Designed for right-handed shooters with full compatibility across modern competition rifle builds.

Vertical 2 & Vertical 3 Grip Package

One of the defining features of the Vanquish is MPA’s modular grip system.

This chassis includes:

Vertical 2 Grip

Designed for medium-sized hands and considered one of the most popular competition grip options.

Benefits include:

✔ Natural trigger reach
✔ Improved wrist position
✔ Enhanced positional shooting comfort
✔ Reduced hand fatigue

Vertical 3 Grip

Designed for shooters preferring a larger grip profile and additional palm support.

Benefits include:

✔ Greater hand contact
✔ Improved rifle control
✔ Enhanced comfort during extended matches

MPA’s interchangeable grip system allows shooters to tailor the rifle to their exact preferences. Vertical grip configurations remain among the most popular options in PRS competition.

Standard Buttstock Configuration

This chassis is fitted with the:

Standard Buttstock

The Standard Buttstock provides:

✔ Increased rear mass
✔ Enhanced recoil management
✔ Excellent rear balance characteristics
✔ Proven PRS performance

Features include:

• Adjustable cheekpiece
• Adjustable length of pull
• Adjustable recoil pad height
• Adjustable recoil pad cant
• Integrated bag rider
• Integrated butt hook

The Standard Buttstock remains a favourite among shooters seeking maximum stability during positional shooting.

5-Segment Nesting NV Bridge System

One of the most innovative features of the Vanquish platform is the:

Nesting Bridge System

This configuration includes:

Five NV Bridge Segments

Benefits include:

✔ Additional hand placement options
✔ Improved positional control
✔ Mirage reduction during hot conditions
✔ Enhanced rifle manipulation
✔ Improved stability on barricades

The bridges can be positioned to suit individual shooter preferences and rifle configurations. MPA specifically designed the system to provide both functional grip surfaces and mirage shielding during extended shooting sessions.

Grip Tape Top Configuration

The selected:

Grip Tape Bridge Top

Provides:

✔ Improved traction
✔ Positive hand placement
✔ Better control in wet conditions
✔ Reduced slipping during stage transitions

Particularly beneficial during PRS matches where rapid position changes are common.

Revolutionary Fore-End Design

The Vanquish fore-end incorporates:

Extended Competition Fore-End

Features include:

• 2″ longer than previous Matrix designs
• Ultra-rigid structure
• Integrated side rails
• Full-length ARCA rail system
• M-LOK compatibility

The longer fore-end provides increased flexibility when engaging positional props and barricades.

Advanced Weight Tuning System

The Vanquish was engineered with:

Forward Weight Bias

MPA intentionally shifted weight from the buttstock into the fore-end to improve:

✔ Balance tuning
✔ Barricade stability
✔ Recoil tracking
✔ Positional consistency

Combined with MPA’s optional weight tuning system, shooters can fine-tune balance precisely for their rifle configuration.

MPA RAT Integrated ARCA Rail

The chassis includes MPA’s proven:

RAT System (Rapid Adjustment Technology)

Features:

✔ Full-length ARCA rail
✔ Quick bipod positioning
✔ Tripod compatibility
✔ Rapid accessory adjustment

This system has become a benchmark feature among serious PRS competitors.

Key Features

✔ Tungsten Cerakote Finish
✔ Remington Short Action Inlet
✔ Right Hand Configuration
✔ Vertical 2 Grip Included
✔ Vertical 3 Grip Included
✔ Standard Buttstock
✔ 5-Segment Nesting NV Bridge System
✔ Grip Tape Bridge Configuration
✔ Full-Length RAT ARCA Rail
✔ M-LOK Compatible Fore-End
✔ Adjustable Cheekpiece
✔ Adjustable Length of Pull
✔ Adjustable Buttpad Height & Cant
✔ Integrated Bag Rider & Butt Hook
✔ V-Bedding System
✔ Competition-Optimised Weight Distribution

Specifications

Ideal For

• PRS Competition
• NRL Competition
• Precision Rifle Training
• Tactical Competition
• Long Range Hunting Builds
• Impact 737R Builds
• Zermatt Origin Builds
• Custom Remington 700 Builds

Why Buy From Delta Tactical

Delta Tactical specialises in premium competition rifle systems and custom precision rifle builds.

When you purchase from us you receive:

✔ Genuine MasterPiece Arms products
✔ Expert chassis configuration advice
✔ Fast Australian shipping
✔ Local support and after-sales service
✔ Competition-proven product knowledge

Comparison Table: Vanquish vs Matrix Pro II vs BA Competition

Buyer’s Guide: Why Choose the Vanquish?

Choose the Vanquish if:

✔ You compete seriously in PRS or NRL
✔ You want the latest MPA chassis technology
✔ Balance tuning is important to you
✔ You regularly shoot positional stages
✔ You want maximum customisation options

Choose the Matrix Pro II if:

✔ You want most of the Vanquish features at a lower price point
✔ The newest fore-end design isn’t essential

Choose the BA Competition if:

✔ You want proven performance with a simpler chassis design

For shooters building a flagship competition rifle, the MPA Vanquish Chassis with Vertical 2 & 3 Grips, Standard Buttstock and 5-Segment NV Bridge represents one of the most capable PRS chassis systems currently available.

The post Vanquish Chassis – Remington Short Action – Right Hand – Black appeared first on Delta Tactical.

The Next Evolution of Competition Chassis Design

The Vanquish Chassis was developed from years of PRS and NRL competition experience, incorporating extensive feedback from top-level shooters.

MPA redesigned the chassis from the ground up to improve:

• Positional stability
• Weight distribution
• Balance tuning
• Shooter ergonomics
• Barricade performance
• Accessory integration

The result is one of the most refined competition chassis systems available today.

Your Selected Configuration

Colour

Tungsten Cerakote

A premium Cerakote finish that delivers exceptional durability while offering a clean, professional appearance suitable for competition, hunting and tactical applications.

Action Inlet

Remington Short Action (and Clones)

Compatible with a huge range of premium actions including:

• Impact 737R
• Zermatt Origin
• Zermatt TL3
• Defiance Deviant
• Lone Peak Fuzion
• Terminus Zeus
• Surgeon
• Kelbly Atlas Tactical

and most Remington 700 short-action footprint clones.

Orientation

Right Hand

Designed for right-handed shooters with full compatibility across modern competition rifle builds.

Vertical 2 & Vertical 3 Grip Package

One of the defining features of the Vanquish is MPA’s modular grip system.

This chassis includes:

Vertical 2 Grip

Designed for medium-sized hands and considered one of the most popular competition grip options.

Benefits include:

✔ Natural trigger reach
✔ Improved wrist position
✔ Enhanced positional shooting comfort
✔ Reduced hand fatigue

Vertical 3 Grip

Designed for shooters preferring a larger grip profile and additional palm support.

Benefits include:

✔ Greater hand contact
✔ Improved rifle control
✔ Enhanced comfort during extended matches

MPA’s interchangeable grip system allows shooters to tailor the rifle to their exact preferences. Vertical grip configurations remain among the most popular options in PRS competition.

Standard Buttstock Configuration

This chassis is fitted with the:

Standard Buttstock

The Standard Buttstock provides:

✔ Increased rear mass
✔ Enhanced recoil management
✔ Excellent rear balance characteristics
✔ Proven PRS performance

Features include:

• Adjustable cheekpiece
• Adjustable length of pull
• Adjustable recoil pad height
• Adjustable recoil pad cant
• Integrated bag rider
• Integrated butt hook

The Standard Buttstock remains a favourite among shooters seeking maximum stability during positional shooting.

5-Segment Nesting NV Bridge System

One of the most innovative features of the Vanquish platform is the:

Nesting Bridge System

This configuration includes:

Five NV Bridge Segments

Benefits include:

✔ Additional hand placement options
✔ Improved positional control
✔ Mirage reduction during hot conditions
✔ Enhanced rifle manipulation
✔ Improved stability on barricades

The bridges can be positioned to suit individual shooter preferences and rifle configurations. MPA specifically designed the system to provide both functional grip surfaces and mirage shielding during extended shooting sessions.

Grip Tape Top Configuration

The selected:

Grip Tape Bridge Top

Provides:

✔ Improved traction
✔ Positive hand placement
✔ Better control in wet conditions
✔ Reduced slipping during stage transitions

Particularly beneficial during PRS matches where rapid position changes are common.

Revolutionary Fore-End Design

The Vanquish fore-end incorporates:

Extended Competition Fore-End

Features include:

• 2″ longer than previous Matrix designs
• Ultra-rigid structure
• Integrated side rails
• Full-length ARCA rail system
• M-LOK compatibility

The longer fore-end provides increased flexibility when engaging positional props and barricades.

Advanced Weight Tuning System

The Vanquish was engineered with:

Forward Weight Bias

MPA intentionally shifted weight from the buttstock into the fore-end to improve:

✔ Balance tuning
✔ Barricade stability
✔ Recoil tracking
✔ Positional consistency

Combined with MPA’s optional weight tuning system, shooters can fine-tune balance precisely for their rifle configuration.

MPA RAT Integrated ARCA Rail

The chassis includes MPA’s proven:

RAT System (Rapid Adjustment Technology)

Features:

✔ Full-length ARCA rail
✔ Quick bipod positioning
✔ Tripod compatibility
✔ Rapid accessory adjustment

This system has become a benchmark feature among serious PRS competitors.

Key Features

✔ Tungsten Cerakote Finish
✔ Remington Short Action Inlet
✔ Right Hand Configuration
✔ Vertical 2 Grip Included
✔ Vertical 3 Grip Included
✔ Standard Buttstock
✔ 5-Segment Nesting NV Bridge System
✔ Grip Tape Bridge Configuration
✔ Full-Length RAT ARCA Rail
✔ M-LOK Compatible Fore-End
✔ Adjustable Cheekpiece
✔ Adjustable Length of Pull
✔ Adjustable Buttpad Height & Cant
✔ Integrated Bag Rider & Butt Hook
✔ V-Bedding System
✔ Competition-Optimised Weight Distribution

Specifications

Ideal For

• PRS Competition
• NRL Competition
• Precision Rifle Training
• Tactical Competition
• Long Range Hunting Builds
• Impact 737R Builds
• Zermatt Origin Builds
• Custom Remington 700 Builds

Why Buy From Delta Tactical

Delta Tactical specialises in premium competition rifle systems and custom precision rifle builds.

When you purchase from us you receive:

✔ Genuine MasterPiece Arms products
✔ Expert chassis configuration advice
✔ Fast Australian shipping
✔ Local support and after-sales service
✔ Competition-proven product knowledge

Comparison Table: Vanquish vs Matrix Pro II vs BA Competition

Buyer’s Guide: Why Choose the Vanquish?

Choose the Vanquish if:

✔ You compete seriously in PRS or NRL
✔ You want the latest MPA chassis technology
✔ Balance tuning is important to you
✔ You regularly shoot positional stages
✔ You want maximum customisation options

Choose the Matrix Pro II if:

✔ You want most of the Vanquish features at a lower price point
✔ The newest fore-end design isn’t essential

Choose the BA Competition if:

✔ You want proven performance with a simpler chassis design

For shooters building a flagship competition rifle, the MPA Vanquish Chassis with Vertical 2 & 3 Grips, Standard Buttstock and 5-Segment NV Bridge represents one of the most capable PRS chassis systems currently available.

The post Vanquish Chassis – Remington Short Action – Right Hand – Tungsten appeared first on Delta Tactical.

The MPA DN5 (.30 cal) is the high-performance bolt-action muzzle brake designed to tame the recoil and muzzle rise of .308-class cartridges while keeping the rifle on target for fast, accurate follow-up shots. Built for PRS/NRL competitors, long-range hunters, and precision shooters, the DN5 uses a multi-port blast pattern to redirect propellant gases and counter muzzle climb with exceptional efficiency.

Made from high-tensile steel and finished with a durable black nitride coating, the DN5 is available in common bolt-action thread sizes and is sized specifically for .30-caliber rifles (308 Winchester, 7mm PRC, 7mm SAUM and similar), or any caliber .30 or smaller. The brake is engineered to withstand higher gas pressures and volumes typical of these cartridges while delivering the control shooters demand.

Key benefits:

• Reduced felt recoil — redirecting gases to absorb rearward impulse so you stay on target.

• Minimised muzzle rise — upwardly-directed ports force the muzzle down for faster follow-up shots.

• Rugged construction — high tensile steel with black nitride finish for durability and corrosion resistance.

• Bolt-action specific fit — designed for bolt rifles and offered in standard bolt-action thread pitches (5/8-24 or 3/4-24).

Whether you’re running PRS stages or shooting heavy-kicking hunting loads, the MPA DN5 .30 cal brake gives you the control to make the next shot count.

The post DN5 Muzzle Brake 6mm-6.5mm appeared first on Delta Tactical.

Masterpiece Arms builds World Class Rifles. We start with our industry leading Chassis System, utilize the Best Actions and Triggers produced, and a 416R SS Handlapped Barrels provide some the best shooting, most accurate rifles in existence. Designed, Built and Enhanced by Long Range Shooters and Hunters, our Rifles fulfill the needs of the most discerning shooters.

MPA BA PMR Pro II (Precision Match Rifle)

This rifle uses a Curtis/MPA Action, 416r Stainless Handlapped Barrel, ESR Chassis, and a Trigger Tech Diamond Trigger. The PMR is a world class rifle built to meet this price limit set by the PRS. An outstanding value for a 1/2″ MOA Guaranteed Rifle

Action:

• MPA/Curtis Action
• Wire EDM Bolt Lug Raceways
• 3 Lug Head
• 60 Degree Bolt Throw
• Rollerball tipped cocking piece to reduce drag
• 20 MOA Scope Rail
• Quick Release Firing Pin Assembly Removal System (Tool Less)
• Bolt: One Piece Design of the Bolt, Lugs and Handle
• Spiral Fluting on all Bolts
• All Bolts are Hand Lapped and Fitted to each individual action
• DLC Coated
• Mini 16 Extractor
• Remington 700 footprint

Barrel:

• 416RQ Stainless Steel
• Precision Gun Drilled, Reamed and Honed
• Pull Button Rifled
• Stress Relieved
• Hand Lapped
• Bore and Land Inspected on Video Borescope
• Sheffield Air Gage Inspection to .0001″ on Bore and Rifle Land Variation
• Chamber is indicated within .0001″ or less – to the bore of the rifle

Chassis System:

• Masterpiece Arms ESR
• Produced from 6061 Aluminum
• V-Bedding System with Additional clearance for Glass Bedding Action and Straight Section of Barrel
• MPA Buttstock with Adjustable Cheek Riser, Length of Pull
• Ultra Bag Rider – Aluminum Type
• Night Vision Bridge
• V4 Spigot Mount (Pic Rail and Arca Swiss Rail)
• Cerakote Finish – Multiple Colors Available
• Built In Inclinometer leveling system
• Enhanced Vertical Grip
• Thumb Notch
• R.A.T. System Compatible

Muzzle Brake:

• This rifle is available with either the MPA DN3 Muzzle Brake or No Brake (A thread protector is provided when no Brake is included)

Trigger:

• Trigger Tech Diamond Flat
• Pull Weight: 4 oz- 2 lbs

Accuracy:

• 1/2″ MOA or greater

Rifle Case:

• Plano Basic Rifle Case

Specifications

• Total Rifle Weight (13.0 lbs with 26″ M24 Barrel – Does Not Include Ammo, Bipod, Magazine or Optic)
• Barrel: 416R Stainless Steel, Handlapped
• Action: MPA/Curtis
• Chamber: Zero Runout Chambering Method
• Calibers: 308 Win, 6.5 PRC, 6.5 Creedmoor, 6mm Creedmoor, 65×47 Lapua, 6 Dasher, 6BR, 6GT, 6BRA, 6×47 Lapua, 223
• Muzzle threaded 5/8×24
• Brake: MPA DN3 Brake or No Brake (includes Thread Protector)
• Chassis Type: ESR Chassis
• Chassis Material: 6061 Aluminum Billet
• Chassis Coating: H Series Cerakote – Black or Tungsten
• Magazine: Accurate Mag 10 Round (308) Magazine
• Chassis Weight: 5.2 lbs
• Rifle Overall Weight:13.0 lbs
• Barrel Profile MPA Match Contour
• Barrel Length: 26″
• Trigger Type: Trigger Tech Diamond
• Trigger Pull Weight: 4oz – 2lbs
• Adjustable Length of Pull: 13.5-14.5″
• Cheek Riser: Adjustable
• Recoil Plate: Adjustable for Height and Cant

The post MPA BA PMR Pro Rifle II – 6 Creedmoor – Black/Black appeared first on Delta Tactical.

Masterpiece Arms builds World Class Rifles. We start with our industry leading Chassis System, utilize the Best Actions and Triggers produced, and our MPA/Spencer 416R Handlapped Barrels provide some the best shooting, most accurate rifles in existence. Designed, Built and Enhanced by Long Range Shooters and Hunters, our Rifles fulfill the needs of the most discerning shooters.

The Matrix Pro PMR Rifle is a combination of our newest Competition Chassis, the Matrix Pro, along with the barreled action configuration from our PMR Series Rifles.

The options for this rifle in color and barrel profile are very specific. This gives us the ability to offer this world class rifle at an attractive pricing structure.

Available in a multitude of calibers, the Chassis’ for this rifle are available in Black and Tungsten and the barrel will be a Polished 26″ MPA Match Contour. These economies of scale on the chassis cerakoting process and barrel manufacturing process provides cost reduction to the over rifle package price.

Calibers available are 223, 6BR, 6BRA, 6 Dasher, 6GT, 6mm Creedmoor, 6.5 Creedmoor, 6.5×47 Lapua, 6.5 PRC, and 308.

Action:

• MPA Short Action
• Wire EDM Bolt Lug Raceways
• 3 Lug Head
• 60 Degree Bolt Throw
• Rollerball tipped cocking piece to reduce drag
• 20 MOA Scope Rail
• Quick Release Firing Pin Assembly Removal System (Tool Less)
• Bolt: One Piece Design of the Bolt, Lugs and Handle
• Spiral Fluting
• DLC Coated
• Mini 16 Extractor

Barrel:

• 416RQ Stainless Steel
• Precision Gun Drilled, Reamed and Honed
• Pull Button Rifled
• Stress Relieved
• Polished
• Hand Lapped
• Bore and Land Inspected on Video Borescope
• Sheffield Air Gage Inspection to .0001″ on Bore and Rifle Land Variation
• Chamber is indicated within .0001″ or less – to the bore of the rifle

Chassis System:

• Masterpiece Arms Matrix Pro with Drop Down Bag Rider
• Magwell Plate System Ready
• Produced from 6061 Aluminum
• V-Bedding System with Additional clearance for Glass Bedding Action and Straight Section of Barrel
• MPA Matrix with Adjustable Cheek Riser, Length of Pull
• Built In Bag Rider with Butthook
• Night Vision Bridge
• V4 Spigot Mount (Pic Rail and Arca Swiss Rail)
• Cerakote Finish – Multiple Colors Available
• Built In Inclinometer leveling system
• Matrix EVG Grip (Alternate grips are additional)
• Thumb Notch
• R.A.T. System Compatible

Thread Protector:

• MPA Muzzle Thread Protector

Trigger:

• Trigger Tech Diamond
• Pull Weight: 4 oz-2 lbs

Accuracy:

• 1/2″ MOA or Better

Rifle Case:

• Plano Basic Rifle Case

Specs

• Total Rifle Weight (13.5 lbs with 26″ M24  Barrel – Does Not Include Ammo, Bipod, Magazine or Optic)
• Barrel: 416R Stainless Steel, Handlapped
• Action: MPA
• Chamber: Zero Runout Chambering Method
• Brake: No Included
• Chassis Type: Matrix
• Chassis Colors: Black or Tungsten
• Chassis Material: 6061 Aluminum Billet
• Chassis Coating: H Series Cerakote
• Magazine: Accurate Mag 10 Round (308) Magazine
• Chassis Weight: 6.2 lbs
• Barrel Profile MPA Match Contour
• Barrel Length: 26″
• Trigger Type: Trigger Tech Diamond (4 oz – 2 lbs)
• Adjustable Length of Pull: 12.75″ to 14″
• Cheek Riser: Adjustable
• Recoil Plate: Adjustable for Height and Cant

The post MPA Matrix Pro PMR Rifle – 6 Creedmoor – Black/Black appeared first on Delta Tactical.

Masterpiece Arms builds World Class Rifles. We start with our industry leading Chassis System, utilize the Best Actions and Triggers produced, and our MPA/Spencer 416R Handlapped Barrels provide some the best shooting, most accurate rifles in existence. Designed, Built and Enhanced by Long Range Shooters and Hunters, our Rifles fulfill the needs of the most discerning shooters.

The Matrix Pro PMR Rifle is a combination of our newest Competition Chassis, the Matrix Pro, along with the barreled action configuration from our PMR Series Rifles.

The options for this rifle in color and barrel profile are very specific. This gives us the ability to offer this world class rifle at an attractive pricing structure.

Available in a multitude of calibers, the Chassis’ for this rifle are available in Black and Tungsten and the barrel will be a Polished 26″ MPA Match Contour. These economies of scale on the chassis cerakoting process and barrel manufacturing process provides cost reduction to the over rifle package price.

Calibers available are 223, 6BR, 6BRA, 6 Dasher, 6GT, 6mm Creedmoor, 6.5 Creedmoor, 6.5×47 Lapua, 6.5 PRC, and 308.

Action:

• MPA Short Action
• Wire EDM Bolt Lug Raceways
• 3 Lug Head
• 60 Degree Bolt Throw
• Rollerball tipped cocking piece to reduce drag
• 20 MOA Scope Rail
• Quick Release Firing Pin Assembly Removal System (Tool Less)
• Bolt: One Piece Design of the Bolt, Lugs and Handle
• Spiral Fluting
• DLC Coated
• Mini 16 Extractor

Barrel:

• 416RQ Stainless Steel
• Precision Gun Drilled, Reamed and Honed
• Pull Button Rifled
• Stress Relieved
• Polished
• Hand Lapped
• Bore and Land Inspected on Video Borescope
• Sheffield Air Gage Inspection to .0001″ on Bore and Rifle Land Variation
• Chamber is indicated within .0001″ or less – to the bore of the rifle

Chassis System:

• Masterpiece Arms Matrix Pro with Drop Down Bag Rider
• Magwell Plate System Ready
• Produced from 6061 Aluminum
• V-Bedding System with Additional clearance for Glass Bedding Action and Straight Section of Barrel
• MPA Matrix with Adjustable Cheek Riser, Length of Pull
• Built In Bag Rider with Butthook
• Night Vision Bridge
• V4 Spigot Mount (Pic Rail and Arca Swiss Rail)
• Cerakote Finish – Multiple Colors Available
• Built In Inclinometer leveling system
• Matrix EVG Grip (Alternate grips are additional)
• Thumb Notch
• R.A.T. System Compatible

Thread Protector:

• MPA Muzzle Thread Protector

Trigger:

• Trigger Tech Diamond
• Pull Weight: 4 oz-2 lbs

Accuracy:

• 1/2″ MOA or Better

Rifle Case:

• Plano Basic Rifle Case

Specs

• Total Rifle Weight (13.5 lbs with 26″ M24  Barrel – Does Not Include Ammo, Bipod, Magazine or Optic)
• Barrel: 416R Stainless Steel, Handlapped
• Action: MPA
• Chamber: Zero Runout Chambering Method
• Brake: No Included
• Chassis Type: Matrix
• Chassis Colors: Black or Tungsten
• Chassis Material: 6061 Aluminum Billet
• Chassis Coating: H Series Cerakote
• Magazine: Accurate Mag 10 Round (308) Magazine
• Chassis Weight: 6.2 lbs
• Barrel Profile MPA Match Contour
• Barrel Length: 26″
• Trigger Type: Trigger Tech Diamond (4 oz – 2 lbs)
• Adjustable Length of Pull: 12.75″ to 14″
• Cheek Riser: Adjustable
• Recoil Plate: Adjustable for Height and Cant

The post MPA Matrix Pro PMR Rifle – 6 Creedmoor – Tungsten/Black appeared first on Delta Tactical.

Masterpiece Arms builds World Class Rifles. We start with our industry leading Chassis System, utilize the Best Actions and Triggers produced, and our MPA/Spencer 416R Handlapped Barrels provide some the best shooting, most accurate rifles in existence. Designed, Built and Enhanced by Long Range Shooters and Hunters, our Rifles fulfill the needs of the most discerning shooters.

The Matrix Pro PMR Rifle is a combination of our newest Competition Chassis, the Matrix Pro, along with the barreled action configuration from our PMR Series Rifles.

The options for this rifle in color and barrel profile are very specific. This gives us the ability to offer this world class rifle at an attractive pricing structure.

Available in a multitude of calibers, the Chassis’ for this rifle are available in Black and Tungsten and the barrel will be a Polished 26″ MPA Match Contour. These economies of scale on the chassis cerakoting process and barrel manufacturing process provides cost reduction to the over rifle package price.

Calibers available are 223, 6BR, 6BRA, 6 Dasher, 6GT, 6mm Creedmoor, 6.5 Creedmoor, 6.5×47 Lapua, 6.5 PRC, and 308.

Action:

• MPA Short Action
• Wire EDM Bolt Lug Raceways
• 3 Lug Head
• 60 Degree Bolt Throw
• Rollerball tipped cocking piece to reduce drag
• 20 MOA Scope Rail
• Quick Release Firing Pin Assembly Removal System (Tool Less)
• Bolt: One Piece Design of the Bolt, Lugs and Handle
• Spiral Fluting
• DLC Coated
• Mini 16 Extractor

Barrel:

• 416RQ Stainless Steel
• Precision Gun Drilled, Reamed and Honed
• Pull Button Rifled
• Stress Relieved
• Polished
• Hand Lapped
• Bore and Land Inspected on Video Borescope
• Sheffield Air Gage Inspection to .0001″ on Bore and Rifle Land Variation
• Chamber is indicated within .0001″ or less – to the bore of the rifle

Chassis System:

• Masterpiece Arms Matrix Pro with Drop Down Bag Rider
• Magwell Plate System Ready
• Produced from 6061 Aluminum
• V-Bedding System with Additional clearance for Glass Bedding Action and Straight Section of Barrel
• MPA Matrix with Adjustable Cheek Riser, Length of Pull
• Built In Bag Rider with Butthook
• Night Vision Bridge
• V4 Spigot Mount (Pic Rail and Arca Swiss Rail)
• Cerakote Finish – Multiple Colors Available
• Built In Inclinometer leveling system
• Matrix EVG Grip (Alternate grips are additional)
• Thumb Notch
• R.A.T. System Compatible

Thread Protector:

• MPA Muzzle Thread Protector

Trigger:

• Trigger Tech Diamond
• Pull Weight: 4 oz-2 lbs

Accuracy:

• 1/2″ MOA or Better

Rifle Case:

• Plano Basic Rifle Case

Specs

• Total Rifle Weight (13.5 lbs with 26″ M24  Barrel – Does Not Include Ammo, Bipod, Magazine or Optic)
• Barrel: 416R Stainless Steel, Handlapped
• Action: MPA
• Chamber: Zero Runout Chambering Method
• Brake: No Included
• Chassis Type: Matrix
• Chassis Colors: Black or Tungsten
• Chassis Material: 6061 Aluminum Billet
• Chassis Coating: H Series Cerakote
• Magazine: Accurate Mag 10 Round (308) Magazine
• Chassis Weight: 6.2 lbs
• Barrel Profile MPA Match Contour
• Barrel Length: 26″
• Trigger Type: Trigger Tech Diamond (4 oz – 2 lbs)
• Adjustable Length of Pull: 12.75″ to 14″
• Cheek Riser: Adjustable
• Recoil Plate: Adjustable for Height and Cant

The post MPA Matrix Pro PMR Rifle – 6.5 Creedmoor – Tungsten/Black appeared first on Delta Tactical.

Masterpiece Arms Chassis have been the gold standard for Long Range Shooters for the past 8 years. In the PRS, which is the testing ground for the best rifle equipment produced, the MPA Chassis is the #1 Chassis (used by the most shooters), won more 1 and 2 Day matches and the most AG Cup Matches since the series inception. Our Chassis Technology is market leading, allowing shooters who run our chassis to hit more targets, win more matches, and harvest more trophies.

MPA BA Competition Chassis

The BA Comp Chassis is our highly successful full size chassis. It is designed to be a drop in replacement for Remington 700 footprint actions. But are available for Tikka, Howa, Savage, and a variety of other inlets. Whether you’re interested in increasing the accuracy capabilities of your existing action; adding tactical features to your rifle; or building a precision rifle for long range competitions, our chassis is sure to exceed your expectations.

When shooters are looking for the most versatile & accurate rifle platform available, they look to the BA Comp Chassis. Whether you are shooting in PRS/NRL matches, hunting, F-class, or general long range shooting, the BA Comp has been the gold standard since 2015 due to accuracy, versatility, adjustable fit, and durability the system provides.

Standard Features

• Machined from 6061 aluminum
• V-Bedding system
• MPA buttstock with adjustable cheek riser and length of pull
• EVG (Enhanced Vertical Grip)
• Front night vision bridge
• Multiple QD sling swivel locations
• User located side rails (option)
• Durable Cerakote finish in a variety of colors. Black, Burnt Bronze, Tungsten, FDE, Sniper Green, Gunmetal, NRA Blue, USMC Red are standard colors. Other options are available for an upcharge.
• Unique pocketing system reduces weight and increases structural integrity of the chassis
• Adjustable length of pull 12.75″ to 14″
• Recoil pad is adjustable for height and cant
• Adjustable cheek riser
• Inclinometer leveling system
• Machined thumb notch
• Ultra Bag Rider
• V4 Spigot Mount
• 2 Round Holder (Short action chassis only)
• RAT Rail (Rapid Adjustment Technology) 1.5″ Acra Rail Built into the chassis
• Our Chassis take any AICS type magazines (Mag not included).
• 5. Lbs

Notice on Inlets: Our Chassis with the Remington 700 Inlet in their prospective Short or Long action configurations fit all Remington 700 actions and clones including but not limited to the following: Bat Machine HR & VR, Bergara, Curtis Customs, Defiance Machine, Stiller Tac30 and Tac300, Bighorn TL2, Bighorn TL3, Lonepeak Arms, Kelbly Atlas Tactical, Ga Precision Templar V2, GA precision Tempest, Impact 737R, Surgeon SA & LA (Except Surgeon XL)

Specs

• Chassis Material: 6061 Aluminum Billet
• Chassis Coating: H Series Cerakote
• Magazine Compatibility: AICS and AW (Short Action) & AICS (Long Action)
• Weight: 5.2 lbs
• Fore end Weight: 2.8 lbs
• Buttstock Weight: 2.4 lbs
• Fore end Width: 1.700″
• Overall Length: 34.6″
• Fore end Length: 12″
• Max Barrel Diameter: 1.200″ (Barrel Channel is actually 1.275″)

The post MPA BA Competition Chassis – R700 SA – Black appeared first on Delta Tactical.