Area 419 Bullet Seating Plate for The ZERO — Perfect Flatness, Zero Interference

Upgrade your ZERO reloading press with a precision tool designed to elevate your bullet seating consistency. The Bullet Seating Plate for The ZERO from Area 419 offers a perfectly flat stainless steel surface to push your cases — eliminating any possible die interference that can induce runout or misalignment.

Why Use This Seating Plate?

• No Die Contact — Unlike traditional shellholders with rims or ledges, this plate has no extraction rim, ensuring the die only interacts with the case shoulder or taper. This minimizes mechanical contact points that can introduce error.

• Maximum Contact Surface — More surface area than typical shellholders means better stability during seating.

• Guaranteed Flatness — Precision-ground stainless steel construction ensures it remains flat and stable under load.

• Only for The ZERO — This plate is purpose-built for the Area 419 ZERO Reloading Press. It will NOT function with other presses — order accordingly.

• Manual Removal May Be Required — Because there’s no extraction rim, cases may need to be removed by hand after seating. Some drop freely by gravity depending on configuration; others must be pulled.

Add this seating plate to your reloading setup and realize improvements in consistency, alignment, and the precision of your handloads when using The ZERO.