Global Exclusive for Delta Tactical.

We received many requests from our Precision Rifle Shooting Community for a no taper Straight Contour Stainless Steel barrel.  As a result we worked with Proof Research and they created the ACCURACY contour just for us.  This is a 1.25″ straight barrel.  There is no taper whatsoever.  This is a straight 4kg 26″ finished length barrel all manufactured by Proof Research to their exacting standards and specifications for a world class Match Grade barrel.

• 6mm
• 7.5 Twist
• 26″ Length
• Accuracy – Straight Barrel Contour
• 4kg unfinished weight

When we joined with Lawrence Barrels in 2012 we acquired 15 years of experience in manufacturing precision steel rifle barrels. We make our stainless steel barrels in-house with an absolute commitment to extreme accuracy and quality. We start with double stress-relieved 416R stainless steel, a pre-hardened chromium stainless steel ideally suited for use in precision, match-grade rifle barrels. 416R was specifically designed by engineers in collaboration with barrel makers and rifle manufacturers to provide the consistency, high quality and durability the firearms industry demands.

416R is our stainless steel of choice because it has the following characteristics:

• Excellent machinability for gun drilling and reaming, plus exceptional polishability for uniform lapping—a must for bore accuracy.
• A homogeneous microstructure which responds to heat treatment providing a uniform hardness along the length of the bar, necessary for accurate rifling to precise groove dimensions.
• An optimum combination of high tensile strength along with adequate toughness to withstand typical chamber pressures encountered during firing.

Our 416R arrives at our factory in long lengths and is then cut to finished barrel length. The barrels are then drilled, contoured and reamed to the bore diameter of the cartridge for which they are to be chambered. The barrels are then rifled and lapped and inspected with a bore scope.