Area 419 ZERO M-Series Die Sleeve & Mandrel Kit
Upgrade your reloading flexibility with the ZERO M-Series Die Sleeve & Mandrel Kit from Area 419. Engineered for reloaders who already own an M-Series ZERO die, this kit lets you swap calibers or adjust neck tension without having to buy a full new die. It’s the modular solution that maximises your investment and boosts your reloading workflow.
What’s Included & Why It Matters:
-
One Sizing Sleeve in your selected caliber—identical to the internal sleeve that comes in the complete M-Series die.
-
One Mandrel, providing approximately 0.002″ neck tension in usage, matching the standard mandrel in M-Series dies.
-
One Extra Decapping Pin included as a spare—ensuring continued operation without interruptions.
This kit allows you to expand or adjust your existing ZERO M-Series die setup. Rather than having to purchase an entire new die for a different caliber, you can simply insert a new sleeve and mandrel quickly—and get precision sizing immediately.
Important Notes:
-
This is only for users who already have a ZERO M-Series die. It is not usable on non-M-Series or standard dies.
-
Because the kit lacks the external die body itself, you must maintain your existing die housing.
-
The modularity gives you faster changes between calibers and more flexibility for fine tuning your neck tension.
Whether you’re experimenting with a new cartridge or fine-tuning your load development, the ZERO M-Series Sleeve & Mandrel Kit gives you the modular adaptability and precision you need — without redundant die purchases.
📋 Specifications / Feature Summary Table
| Feature / Spec | Detail / Notes |
|---|---|
| Compatibility | Fits M-Series ZERO dies only — not usable without M-Series die |
| Included Components | One Calibration Sleeve, One Mandrel (~0.002″ neck tension), One spare Decap Pin |
| Modularity / Swappability | Lets you change calibers or adjust neck tension using the same die body |
| Neck Tension | Mandrel applies approx. 0.002″ tension during use |
| Use Case | Ideal for reloaders who want flexibility without buying full dies |
| Material / Build | Precision machined inserts compatible with ZERO’s internal configuration |
| Country / Brand | Area 419 / USA production (same standards as M-Series dies) |
| Important Caveats | Must already own M-Series die; kit is an insert rather than full die |
| Purpose | Expand and customise your reloading setup with minimal extra cost |
Reviews
There are no reviews yet.