The action screw “Kit” fits the CZ 453 American & Varmint model chambered in .22 magnum and .17 HMR only. Please look at the other CZ action screw “Kits” for your model. The complete “Kit” has all the screws and features a #20 Torx(star) head drive. These are high quality custom machined in the USA with USA made raw materials. The head design is such that the screws fit almost 100% perfectly flush with the trigger guard. The star(Torx) drive allows better drive contact area for a non-slip drive every time with minimal wear on the screw and driver bit.

We recommend you start your action screw torque at about 18 inch pounds on the 2 action screws and work up from that point 2 inch pounds at a time until you find your best group size but no more then 32-34 inch pounds. The wood screw only needs to be snug. Our experience has found that a 20 inch pound torque seems to work well for the best group size with most available ammo.

Please check the shaft length of your screws before making your selection:

Long Screw 1.25″(32mm)
Short Screw 0.50″(13mm)
Wood screws are all the same.