Tikka T3, T3x and Sako A7

Extractor and Ejector kit

This is a higher quality and lower cost alternative to the original factory ‘spare bolt parts‘ kit. There are six separate components to this kit. It is relatively easy to replace these components within a few minutes with basic hand tools when on an expedition or out in the field somewhere without workshop access. The kit can also be used for converting bolts utilizing a circlip extractor to a Sako style extractor system (gunsmith fitting required).

Notes

• will fit the Sako A7 and Tikka T3 / T3x in any factory chambering
• the extractor components can be used to convert bolts of other brands to a sako style extractor system, such as the remington 700 with its riveted-in circlip extractor (gunsmithing required)
• the ejector components can be used to convert your Tikka or Sako bolt face to dual ejectors, to change the ejection angle of spent cases and/or increase ejection force (gunsmithing required)
• tools required are a small pin punch and small gunsmith’s hammer, magnetic parts dish optional
• ensure the firing pin assembly has been removed from the bolt prior to driving out the ejector roll pin
• care needs to be taken not to lose these small components when under spring pressure (try assembling within the confines of a large plastic bag)